Kate G. - March 30 2024

How to Falsh the EMMC Chip on Kingroon KP3S Pro V2 and KLP1

How to Falsh the EMMC Chip on Kingroon KP3S Pro V2 and KLP1

The Kingroon KP3S Pro V2 and KLP1 3D printers actually give you full SSH access to the system, some of you have already find that out. If any system failure happens and you are not able to fix it, or you are just doing some test, this article will show you how to flash the EMMC to fix it.Before start, we must warn you, messing up with the system or flashing EMMC have some risks that may cause system failure or warranty loss.

What is EMMC?

eMMC stands for "embedded MultiMediaCard." It's a type of flash storage. In the context of 3D printers, eMMC typically refers to a type of onboard storage used for storing firmware, settings, and other essential data required for the operation of the printer. Many 3D printers utilize eMMC or similar embedded storage solutions to store the firmware that controls the printer's functions, such as motion control, heating, and extrusion.

Having eMMC onboard allows 3D printers to boot quickly and store firmware updates or configurations without relying on external storage devices. It also helps ensure the reliability and stability of the printer's operation by securely storing critical data.eMMC storage in 3D printers may vary in capacity depending on the specific model and manufacturer's design choices. It's typically soldered onto the printer's main control board and accessed directly by the printer's microcontroller.Overall, eMMC storage plays a crucial role in the functionality and performance of 3D printers by providing a reliable and efficient means of storing essential firmware and data.

Prepare

1. Tools you need
Before starting, you need to get a SD card reader. Try get a good one with high performance, or it may not able to white the EMMC moudle.
After that, find the EMMC adapter form the package.

EMMC Chip on Kingroon KP3S Pro V2 and KLP1

2. Files you need
After that, go to https://kingroon.com/blogs/downloads and searching for the system image. We will release new versions soon. If your printer works fine and no actually features shows on the download page, please do not flash it.

And here are the files for the stock system image:
armbian-KP3S Pro V2-20230322 (Beta) (no screen):
https://1drv.ms/f/s!AmGcVrncIH3ZjBYprzZurjFIEcmr?e=c5gmTx

armbian-KP3S Pro V2-20230606 (Latest) (with screen):
https://drive.google.com/file/d/1Bs7II2rqlCsdqx6EUUGfDOED4BwqQK0y/view?usp=sharing

KINGROON-KLP1-coreXY-20230515:
https://drive.google.com/file/d/1C5kIKfGm6xnehemHGuAyQrxUx7w2vPPi/view?usp=share_link

Screen Version: KINGROON-KLP1 V2.2-coreXY-20230725:https://drive.google.com/drive/folders/1t7L45IEp-WOa_zcLiVOOfZC0nxFAs2o5?usp=sharing

KINGROON-KP3S Pro V2 V2.2-20230804:
https://drive.google.com/drive/folders/1ermJnHsMkG-9iVIGMbNGu-Zq0Qh6P_-C?usp=sharing

KINGROON-KLP1V2.4-coreXY-20230817:
https://drive.google.com/drive/folders/13ZEHYivSC4YdXk3IAL9DQA8HWnkc0uQQ?usp=sharing

KINGROON-KP3S Pro V2 V2.4-20230818:
https://drive.google.com/drive/folders/1wjrAW_0z4VPqusYHxfMArWVRWgY23m98?usp=sharing

KINGROON-KLP1V2.1-coreXY-20230918:
https://drive.google.com/drive/folders/1tXjE3U574BQ5OFfaUwFP1oQ4xEVa0r1D?usp=sharing

---------The Above For KINGROON KP Cheetah V1.0/V2.0 Mainboard Only-------

KINGROON-KLP1 V2.2-coreXY-20231125:
https://drive.google.com/file/d/1SB7F3LaVyQQ2gvTTbQyuneyH84fIihx0/view?usp=sharing

KINGROON-KP3S Pro V2 V2.2-20230921: https://drive.google.com/file/d/1DMgFrkZ6e9JufsY6Sq60bGJpBnE02S-F/view?usp=sharing

---------The Above For KINGROON KP Cheetah V2.2 and Newer Mainboard Only-------

3. Software you need
Go to https://etcher.balena.io/ and download balenaEtcher. If you are Windows user who’s already get used to Win32DiskImager, it is also fine.

Prepare the EMMC Module

1. Get the EMMC module
Remove the bottom cover of the KINGROON KP3S Pro V2 printer, then you are able to see the EMMC module. Loose the screws on it, remove the module carefully.

2. Get everything connected
Connect the module to the EMMC adapter and SD card reader, as the photo shows. Be careful with the directions. Then you are ready for the next step.

Flash the EMMC Module

1.Setup balenaEtcher
Connect the SD card reader to your PC or Mac, you should be able to see a disk named “boot”, that’s the EMMC module. If not, please check the connection and make sure the direction is correct.

Open the balenaEtcher, choose the image file you just downloaded, and click flash. Please double check the disk you choose, in case you lost any data.

If the disk disconnected in the middle or the flash failed, please use a different SD card reader.

Once the flashing finished, you are all set. Just put everything back, reboot your printer, and enjoy the 3D printing.

MKS EMMC Adapter 1.0 for KINGROON KP3S Pro V2 and KLP1
MKS EMMC Adapter 1.0 for KINGROON KP3S Pro V2 and KLP1
MKS EMMC Adapter 1.0 for KINGROON KP3S Pro V2 and KLP1
MKS EMMC Adapter 1.0 for KINGROON KP3S Pro V2 and KLP1
MKS EMMC Adapter 1.0 for KINGROON KP3S Pro V2 and KLP1
MKS EMMC Adapter 1.0 for KINGROON KP3S Pro V2 and KLP1
MKS EMMC Adapter 1.0 for KINGROON KP3S Pro V2 and KLP1
MKS EMMC Adapter 1.0 for KINGROON KP3S Pro V2 and KLP1
MKS EMMC Adapter 1.0 for KINGROON KP3S Pro V2 and KLP1
MKS EMMC Adapter 1.0 for KINGROON KP3S Pro V2 and KLP1
MKS EMMC Adapter 1.0 for KINGROON KP3S Pro V2 and KLP1
MKS EMMC Adapter 1.0 for KINGROON KP3S Pro V2 and KLP1

MKS EMMC Adapter 1.0 for KINGROON KP3S Pro V2 and KLP1

$3.00

This is the MKS EMMC adapter for the KINGROON KP3S Pro V2 and KLP1. With this tool you can flash a MKS EMMC chip and rewrite the system in it. For KINGROON users, you can check this link for its tutorial:

Flash Firmware for the THR Board on the Kingroon KP3S Pro V2 and KLP1

Technical Details:
Power: 5V
Port: Micro SD
Requirement: High Speed SD card Reader

View Details
MKSEMMC-ADAPTERV2forKINGROONKP3SProV2andKLP1P6_480x480_7f69db48-8acc-45d2-a716-b241034b8747
MKSEMMC-ADAPTERV2forKINGROONKP3SProV2andKLP1P1_480x480_de51cb20-b30a-4ec5-b5cd-00928996a169
MKSEMMC-ADAPTERV2forKINGROONKP3SProV2andKLP1P2_480x480_7da36024-9a24-4e5a-89be-9c902600a549
MKSEMMC-ADAPTERV2forKINGROONKP3SProV2andKLP1P2_480x480_7da36024-9a24-4e5a-89be-9c902600a549
MKS EMMC-ADAPTER V2 for Kingroon KP3S Pro V2 and KLP1
MKS EMMC-ADAPTER V2 for Kingroon KP3S Pro V2 and KLP1
MKS EMMC-ADAPTER V2 for Kingroon KP3S Pro V2 and KLP1
MKS EMMC-ADAPTER V2 for Kingroon KP3S Pro V2 and KLP1
MKS EMMC-ADAPTER V2 for Kingroon KP3S Pro V2 and KLP1
MKS EMMC-ADAPTER V2 for Kingroon KP3S Pro V2 and KLP1
MKSEMMC-ADAPTERV2forKINGROONKP3SProV2andKLP1P6_480x480_7f69db48-8acc-45d2-a716-b241034b8747
MKSEMMC-ADAPTERV2forKINGROONKP3SProV2andKLP1P1_480x480_de51cb20-b30a-4ec5-b5cd-00928996a169
MKSEMMC-ADAPTERV2forKINGROONKP3SProV2andKLP1P2_480x480_7da36024-9a24-4e5a-89be-9c902600a549
MKSEMMC-ADAPTERV2forKINGROONKP3SProV2andKLP1P2_480x480_7da36024-9a24-4e5a-89be-9c902600a549
MKS EMMC-ADAPTER V2 for Kingroon KP3S Pro V2 and KLP1
MKS EMMC-ADAPTER V2 for Kingroon KP3S Pro V2 and KLP1
MKS EMMC-ADAPTER V2 for Kingroon KP3S Pro V2 and KLP1
MKS EMMC-ADAPTER V2 for Kingroon KP3S Pro V2 and KLP1
MKS EMMC-ADAPTER V2 for Kingroon KP3S Pro V2 and KLP1
MKS EMMC-ADAPTER V2 for Kingroon KP3S Pro V2 and KLP1

MKS EMMC-ADAPTER V2 for Kingroon KP3S Pro V2 and KLP1

$8.00

This is the MKS EMMC-ADAPTER V2, you can use it to flash the EMMC module or read the SD card. If you don't have any high speed or high quality SD card adapter, you will need this adapter.

MKS EMMC-ADAPTER V2 board is a USB 3.0 SD 3.0 Reader for MKS EMMC Module or Micro SD TF Card, has high read and write rates.

Compatible with: Upgrade 32GB EMMC Module for the KINGROON KP3S Pro V2 and KLP1.

Check the below tutorial to get system image and know how to proceed:
How to Falsh the EMMC Chip on Kingroon KP3S Pro V2 and KLP1

Parameters:

MKS EMMC-ADAPTER V2 Parameters
USB interface USB 3.0
Applicable Motherboard MKS EMMC Module, Micro SD TF Card
View Details
32GB EMMC Module for KP3S Pro V2 and KLP1
32GB EMMC Module for KP3S Pro V2 and KLP1
32GB EMMC Module for KP3S Pro V2 and KLP1
32GB EMMC Module for KP3S Pro V2 and KLP1
32GB EMMC Module for KP3S Pro V2 and KLP1
32GB EMMC Module for KP3S Pro V2 and KLP1
32GB EMMC Module for KP3S Pro V2 and KLP1
32GB EMMC Module for KP3S Pro V2 and KLP1
32GB EMMC Module for KP3S Pro V2 and KLP1
32GB EMMC Module for KP3S Pro V2 and KLP1
32GB EMMC Module for KP3S Pro V2 and KLP1
32GB EMMC Module for KP3S Pro V2 and KLP1

32GB EMMC Module for KP3S Pro V2 and KLP1

$12.00

32GB EMMC Module for your KINGROON KP3S Pro V2 and Kingroon KLP1 3D printers. It also fit MKS board with the same type of EMMC Module. You can expend the system storage to 32GB for your KP3S Pro V2 and KLP1, which is much larger than its original 8GB size. It is highly recommend for those who wants to take time lapse video with the Klipper system or have large amount of data to storage.

Compatible with:
MKS EMMC Adapter 1.0 for KINGROON KP3S Pro V2 and KLP1

To flash the EMMC Module, use high speed and high quality SD card adapter to mount it.

Check the below tutorial to get system image and know how to proceed:
How to Falsh the EMMC Chip on Kingroon KP3S Pro V2 and KLP1

View Details

Related Posts

Leave a comment

Please note, comments must be approved before they are published