for QIDI X-Max 3 Smooth / Double-Sided PEI Plate

X-Max 3 Double-Sided  PEI plate

Double-sided PEI gold textured board for QIDI X-Max 3 Printer
Note:  To ensure proper adhesion, regularly clean the printing surface with hot water and dish soap to remove any dust or grease residue.

Avoid using acetone to clean the textured HF surface, as it may cause damage.

To make removing printed models easier, wait a few minutes for them to cool down before attempting to remove them.

【Special Design】: Compared with smooth PEI, the design of flexible steel bed with Double Sided Textured PEI surface is excellent. The matte texture makes it easier for the printing material to adhere to the surface of PEI. Note: The cost of the product is very expensive. In fact, it is not easy to produce and transport, and the quantity is small. Please measure the size of your printing platform before purchasing. We are very grateful for your love and care for the product.

• 【Proven Solution】:No glue, No tap, when hotbed temperature reaches 60℃ ,materials such as PLA ABS will stick well, and after printing, when spring steel PEI build plate cools to room temperature, it's easy to remove the printed matter from the platform by bending slightly. Through hundreds of experimental tests, repeated use is still as new.

• 【Good Quality】: Flexible, removable, high strength and heat resistance, Three-Layer design, thicker and more durable. Easily handle temperatures up to 130°C. And perfect for PLA, PEEK, ABS.Note:The adaptation temperature of different materials is different, please adjust it reasonably.

Double Sided Textured PEI Plate】This is a Double Sided Textured PEI plate for QIDI X-Max 3 printers which present different textures, double sided printing and cost-effective. size：330*330CM, it fits perfectly with the Flsu Core-XY,Troxy X3S/ X5SA/X5SA Pro,Geetch A30,A30 Pro,Qid1 X-Max3, Neptun 3/4 Plus/Rais 3D Pro 2/Pro 2 Plus 3D Printer

【Effortless Model Removal】When the build plate cool down to the room temperature, no need other tools and the model effortlessly separates from the plate

【Clean the Build Plate】For better adhesion, please spray with isopropyl alcohol and wipe the build plate with a lint-free towel before use, any bit of grease or residue makes your prints non-stick

【Maintenance the Print Bed】Clean the surface regularly with water and alcohol or IPA for optimal adhesion. We recommended the filaments is PLA/TPU/PETG/ABS/Nylon etc. and the high temperature of the heat bed is not exceeding to 260℃

【Easy Print Removal & Simple Cleaning】 The flexible spring steel build plate allows you to easily remove prints. After printing, simply let the platform cool naturally to room temperature for automatic release, or gently flex the plate to quickly remove the model without causing any damage. Clean the PEI surface with 75% alcohol or mild soapy water to remove residue. For stubborn stains, preheat the plate to 150°C and gently scrub with a soft brush to ensure optimal adhesion for every print.

QiDI X-Max 3 Smooth Plate

Double-sided magnetic flexible board, one side is PEI textured board, the other side is mirror smooth PEA film. The filaments have good adhesion and warp resistance.

Note: To ensure proper adhesion, regularly clean the printing surface with hot water and dish soap to remove any dust or grease residue.

Avoid using acetone to clean the textured HF surface, as it may cause damage.
To remove printed models easier, wait a few minutes for them to cool down before attempting to remove them.

【Easy Print Removal & Simple Cleaning】 The flexible spring steel build plate allows you to easily remove prints. After printing, simply let the platform cool naturally to room temperature for automatic release, or gently flex the plate to quickly remove the model without causing any damage. Clean the PEI surface with 75% alcohol or mild soapy water to remove residue. For stubborn stains, preheat the plate to 150°C and gently scrub with a soft brush to ensure optimal adhesion for every print.