60mm D Cut Rod for Voron 2.2

Material: Bearing steel
Package: 4 pcs 5x60mm +1pcs 5x30mm

Description:
Suitable for voron 2.4 assembly in the light shaft parts, length respectively 5x30mm and 5x60mm two, D axis for wire cutting processing, cutting surface than other chrome plating at easy to rust, please do a good job of anti-rust treatment. voron assembly drawings require 5x30mm number of 1, 5x60mm number of 4.

According to the bom table, we choose to buy 1 D-shaped shaft of 5x30mm (that is with a groove in the middle), because the 30mm length does not rotate, only for the fixing screw to be tighter, and then buy 4 light shafts of 60mm, with good straightness, for rotating moving parts, with threaded adhesive reinforcement when the top wire is applied. Our 5x60mm light shaft is adapted to nsk625 bearings, you can push the inner ring of the bearing by hand without loosening or tightening, the conventional pin roller in the market will be very tight and difficult to push by hand