UV Resin For LCD 3D Printer

KINGROON 405nm UV Resin Liquid Photopolymer resin for LCD 3D Printing Material Standard 1KG Pack

Specification
♦ Curing wavelength: 405 nm
♦ Liquid density: 1.1
♦ Solid density: 1.184 g/cm⊃3;
♦ Shrinkage: 7.1%
♦ Tensile strength: 23.4 Mpa
♦ Curing time: 6-10 s
♦ Elongation at break: 14.2%
♦ Shelf life: 1 year

Kindly NOTE
【Terms and Conditions:】
Shake well before use,please wear a glove mask,the recommended temperature 20-25 ℃, to avoid dust and the environment.

【Precautions:】
This product can not be taken orally. Keep away from children. Do not enter the eyes. In case of accidental contact, flush with plenty of water as soon as possible. If not, consult a doctor promptly.

【Save notes:】
It is recommended to store at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed, dusty or damp, affecting print quality. Shading preservation, the sun contains a lot of ultraviolet light, will cure photosensitive resin.

【For LCD】
Specifically designed for LCD light source to achieve better printing quality.