Support for PLA/PETG for Bambu Lab

Easy & Tool-free Removal
Smooth Support Interface
Recommended for All PLA & PETG
Transparent Appearance
Comes with High Temperature Reusable Spool
Diameter: 1.75 mm +/- 0.05mm

Cautions for Use

Only Used for Printing the Support Interface
Avoid Printing Individual Models
Recommended Drying before Use
AMS & AMS lite Compatible                                                                                            

Note :

Before printing, please kindly refer to the Printing Tips for optimal results.

Bambu Support for PLA/PETG

The ultimate support material, compatible with both PLA and PETG filaments. Effortless, tool-free removal, preserving the pristine surface of your printed object.

Easy, Tool-free Removal

Support PLA/PETG is specially formulated to minimize fusion with PLA and PETG, thanks to differences in polarity. This unique characteristic ensures hassle-free removal of the support interface, reducing the risk of damage to your printed object.

Smooth Support Interface

Support PLA/PETG offers consistently smooth surface quality at the contact area, ensuring optimal support for intricate details. With zero top interface spacing & Z distance, our support material provides precision and reliability, allowing you to print even the most complex designs with ease.

Cross Compatibility

Support PLA/PETG is designed for seamless use with both PLA and PETG, eliminating the need to switch support materials. This allows you to save time and simplify your workflow.

Parameters Comparison

Learn more different filaments comparison on 3D Printer Filament Comparison Guide | Bambu Lab

Accessory Compatibility

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Printing Tips

• Recommended for use with PLA or PETG filament only. Select "Support for PLA/PETG" in the "Support/Raft Interface" settings in your slicer.

• When using tree supports, please avoid using support filament for the "Support/raft base".

• Store the filament in a dry location, and dry at 75°C for 8 hours if brittle or exposed to moisture (see WIKI's Filament drying guide: Filament Drying Recommendations | Bambu Lab Wiki).

• For more support-related settings, please refer to: Support | Bambu Lab Wiki .