Support for PA / PET for Bambu Lab

Easy removal by hand
Perfect support interface
Recommended for PAHT-CF, PA6-CF, PET-CF, PA-GF, etc.
Comes with High Temperature Reusable Spool
Diameter: 1.75mm +/- 0.03mm

Cautions for Use

ONLY used for support interface
Not used for printing models alone
Dry out before use
AMS compatible
AMS lite NOT Compatible
Enclosure Printers Required

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.

Printing Tips

• Support for PA/PET needs proper drying before printing: recommended drying temperature is 80 ℃ for 8 hours in a blast drying oven, or 90 ℃ for 10 hours on heat bed. Learn more about filament drying. Please refer to How to Dry Filament on the X1, P1, and H2 Series Heatbed | Bambu Lab Wiki

• We recommend removing the support structures within 2 hours after printing to prevent them from sticking after absorbing moisture. If sticking occurs, dry the model to ease the removal.

Parameters Comparison

Learn more different filaments comparison on 3D Printer Filament Comparison Guide | Bambu Lab