PTFE Tube Connector /Inlet Connector for Bambu A2L

PTFE Tube Inlet Connector

[A2L Inlet Connector Fit]: Compatible with Bambu Lab A2L, this PTFE tube inlet connector mounts next to the X-axis motor cover as the matching replacement part for the filament inlet path.

[Smooth Filament Feeding]: Connects the PTFE tube between the AMS, buffer, and toolhead, helping filament move smoothly along the A2L feeding path.

[Pneumatic Tube Connection]: Upper and lower pneumatic connectors hold the PTFE tube at the inlet position, guiding and securing its connection to the AMS feeding path.

[Coupler Replacement Steps]: Brace the lower pneumatic connector while holding the upper one, then lift outward to remove the coupler. Align the positioning holes and locking tabs to reinstall, and gently shake to check secure seating.

[Power-Off Maintenance]: Turn off the printer and disconnect it from power before replacing the coupler. Working with power connected can cause short circuits or electronic damage.

Made of durable material, can reduce the error between extruder and host, reduce the resistance of extruder during printing, make the stroke smoother, can provide you with a longer service life.

Easy to install and use, hold the upper connector, against the lower Pneumatic Connector, then lift outward to remove PTFE tube coupler. Install the coupler, then gently shake it to confirm it is securely installed. Plug and play.

PTFE Tube Connector

This connector is designed for PTFE feeding tube of matched printer models.

Compact structure forms reliable connection to avoid tube loosening during operation.

Smooth inner passage reduces friction and lowers the risk of filament clogging.

Standard dimension supports direct replacement of fitting components.

Suitable for routine maintenance of desktop FDM printing equipment.

PTFE feed tube connector secures guide tubes for stable filament routing.

The connector is specially designed for Bamba A2L and A1 spool bracket. Not for P1P/P1S/P2S/X1-carbon/X1C/X1E/H2C/H2D/H2S/X2D/A1/A1 mini. Before order please note it isn't PTFE Tube inlet connector on x-axis motor cover.

The A2L PTFE Tube Connector is used to connect filament to the PTFE tube when printing with an external spool.