Orbiter V2 Filament Sensor V2.2
No se pudo cargar la disponibilidad para recoger
Use this text to encourage communication or promote sharing on social networks.
Features:
- Filament Runout sensing
- Filament auto loading
- Button for filament unload
Print the sensor housing out of ABS, ASA or some other filament with similar temperature deflection property. The light guide shall be printed out of a transparent filament like HDGlass. The sensor housing shall be printed with support, light guide does not require any support. Suggested layer height is 0.2mm.
You need to change the stock M3 screws of the Orbiter to button head M3 L=20mm (low profile screw head, max 2mm space on the Orbiter v1.5. The original M3 with 15mm length and socket head will not fit anymore). On v1.5 It's a bit tricky to drive in the screw near the latch in, but it’s not impossible (use a big Thor hammer and some brute force.
Compatible:
*Set1: Only Compatible with Orbiter v2.0
*Set2: Compatible with Orbiter v1.0, v1.5 and v2.0
Assembly steps:
1. Push the 6mm ball inside the housing,
2. Slide the electronics inside the housing;
3. Assemble the sensor on top of the Extruder.
What's in the box:
set 1:
Orbiter Filament Sensor x1
OS2 Nylon SLS Printing(only compatible with orbiter v2.0 extruder) x1
SS304 M3 Nut x2
SS304 M3*20 Screws x2
SS304 M3 Washer x4
SS304 D6 Ball x2
Wiring harnes x1
set 2:
Orbiter Filament Sensor x1
SS304 D6 Ball x2
SS304 M3*18 Screws x2
Wiring hames x1
Name:
Orbiter Filament Sensor
Features:
Filament Runout sensing
Filament auto loadingButton for filament unload
Compatible:
*Set1:Only Compatible with Orbiter v2.0
*Set2:Compatible with Orbiter v1.0, v1.5 and v2.0
What's in the box:
set1:Orbiter Filament Sensor x1
OS2 Nylon SLS Printing(only compatible with orbiter v2.0 extruder) x1
SS304 M3 Nut x2
SS304 M3*20 Screws x2
SS304 M3 Washer x4
SS304 D6 Ball x2
Wiring harnes x1
set2:Orbiter Filament Sensor x1
SS304 D6 Ball x2
SS304 M3*18 Screws x2
Wiring harnes x1
Sensor Schematics:
Next picture shows the schematics of the filament sensor.
Print the sensor housing out of ABS, ASA or some other filament with similar temperature deflection property.
The light guide shall be printed out of a transparent filament like HDGlass.
The sensor housing shall be printed with support, light guide does not require any support. Suggested layer height is 0.2mm.
You need to change the stock M3 screws of the Orbiter to button head M3 L=20mm (low profile screw head, max 2mm space on the Orbiter v1.5. The original M3 with 15mm length and socket head will not fit anymore). On v1.5 It's a bit tricky to drive in the screw near the latch in, but it’s not impossible (use a big Thor hammer and some brute force :) ).
Assembly steps:
1. Push the 6mm ball inside the housing,
2. Slide the electronics inside the housing;
3. Assemble the sensor on top of the Extruder.
Display:
