H2D TPU High-Flow Kit for Bambu Lab

Reliable High-Speed TPU Printing — Save Up to 30% Print Time

Specially Tuned for Bambu TPU Filaments

Easy Installation

The H2D TPU High-Flow Kit includes 0.4 mm and 0.6 mm 
TPU High-Flow hotends and the required components for installation.
 

Important Notice Before Purchase

1. Limitations: After installing the TPU hotend, the filament cutter installation is not supported, so the filament cutter function cannot be used, and the right nozzle does not support automatic filament changing and automatic filament feeding and retracting.

 
2. Only flexible filaments are allowed: The TPU hotend has a special inner coating, printing hard filaments is prohibited (such as PLA, PETG, TPU for AMS), otherwise it will cause the coat to wear and fail.

 
3. Position Limitation: The TPU hotend can only be installed on the right nozzle. If it is installed on the left nozzle, it will cause the nozzle lifting mechanism to malfunction.

 
4. Installation Guide: Please read the official H2D TPU High-Flow Kit installation guide on Bambu Lab Wiki before purchasing.

 
5. Model Compatibility: Only supported on H2D and H2D Pro. It is not compatible with other models.

Reliable High-Speed TPU Printing

Specially Tuned for Bambu TPU Filaments

Print parameters are precisely fine-tuned for all Bambu TPU filaments when used with the TPU High-Flow Kit. No manual tweaking required-sticky TPU materials to print smoothly right out of the box.

Easy Installation

Installation takes just a few minutes. Simply pop off the front cover, remove the filament cutter, and slide in the High-Flow hotend—ready to print in no time.

Comparison of Different Nozzle Sizes

Note: Parameter optimization and speed enhancements currently apply only to Bambu TPU 85A, Bambu TPU 90A, and Bambu TPU 95A HF.

Filament Compatibility

Bambu TPU 85A

Bambu TPU 90A

Bambu TPU 95A

Bambu TPU 95A HF

  Generic TPU

Installation Guide

Please refer to the installation guide for the H2D TPU High-Flow Kit available on Bambu Lab Wiki.

For TPU printing recommendations, please also refer to the TPU 85A & 90A Printing Guide for the H2 Series on Bambu Lab Wiki.

In the Box