for QIDI Plus4/ Q1 Pro Cool Plate

Heatbed temperature with Cool Plate
PLA：30-50℃，Recommended 45℃
PETG：50-70℃，Recommended 70℃

Thicker and harder material, very durable.

Strong Surface Adhesion – Made with high-quality spring steel and a low-temperature adhesive coating to ensure reliable model adhesion, reducing warping and lifting during printing.

Durable Coating for Long-Lasting Performance – Specially treated surface layer offers excellent wear resistance and can withstand temperatures up to 120°C, extending the lifespan of the print bed.

Natural Texture Surface – Unique natural texture enhances the quality and appearance of prints by providing a better foundation for layers.

Energy-Efficient Low Bed Temperature – Designed to work with lower heat bed temperatures for more efficient, eco-friendly printing and improved energy savings.

Optimized for PLA and PETG Filaments – Engineered specifically to support popular filaments like PLA and PETG, ensuring stable printing results with sharp details.

QIDI Cool Plate

Upgrade your 3D printing experience with our Cool Plate, designed for PLA/PETG.

Say goodbye to print failures

Super sticky coating designed for PLA and PETG filaments can provide good adhesion to the printer and effectively improve print success rate. No adhesive is required, the bottom of the print is still smooth and stable, and the bottom of the print is reduced when printing large objects.

Eliminating Adhesion Issues

QIDI cool plate is suitable for surfaces with bad shape surface. It can still provide super strong adhesion with a small contact area. It avoids the situation where the prints are scattered all over the floor when removing the printing plate.

How to remove prints from Cool Plate

Use the scrapper included with your printer to gently lift the print, then pry it off carefully. If the print is stuck too tightly, wait for the print plate to cool before removing it. The surface is soft. Be careful when using a scraper to remove printed parts.

About the maintenance of QIDI Cool plate

You can clean the surface with water and detergent if heavy dirt appears. DO NOT use organic solvents (especially acetone) to clean the build plate, as it will damage the surface adhesive layer. The QIDI PLA Silk material exhibits strong adhesion on the QIDI Cool Plate, which may damage printed models. Therefore, we do not recommend using Silk material on the QIDI Cool Plate. For users printing with third-party PLA Silk materials, please select the Generic PLA Silk preset in QIDI Studio and evaluate material compatibility based on the specific conditions.

Product specifications

Why Choose This Cool Plate?

Easy Maintenance:

QIDI Cool Plate has good adhesion and does not require adhesives or frequent cleaning. In case of severe dirt, the surface can be cleaned with water and detergent.

Good adhesion:

After printing, the print can be firmly attached to the plate without parts falling to the ground.

Durable coating:

Cool Plate uses a durable coating for long-lasting performance (scratches, dents, and cracks due to printing are normal).

Designed for PLA/PETG:

 Low-temperature printing is more suitable for PLA and PETG, which saves more power while ensuring good printing results.

Specifications

Spring steel plate: 0.5mm
Coating: 0.05mm spring steel
Net weight: 350g
Surface temperature resistance: 120℃
Use this QIDI Cool Plate - designed to make your every print achieve high-quality results while saving power.