for QIDI Max4/Q2 Cool Plate Pro PEI

Max4 Cool Plate

Excellent adhesion.

Room temperature printing,energy-saving.

Smooth texture, double the durability.

Effortless Demolding.

Long-lasting durability, easy to clean.

Q2 Cool Plate

Excellent adhesion.

Room temperature printing,energy-saving.

Smooth texture, double the durability.

Effortless Demolding.

Long-lasting durability, easy to clean.

Superior Adhesion with Nano-Coating：Features optimized nanoscale microporous texture, delivering "perfect first-layer adhesion" for PLA, PETG, ABS, TPU and more filaments—no shifting or lifting during printing.

Room Temp Printing & Energy-Saving：Print immediately without heating the bed, cutting down preparation time drastically. Saves significant electricity long-term while maintaining reliable filament adhesion at low temperatures.

Double-Sided Smooth & Durable：Dual-sided design doubles service life; advanced surface treatment ensures ultra-flat, smooth model bottoms, enhancing overall print quality without extra sanding.

Effortless Demolding & Scratch-Resistant：Models peel off easily after the plate cools. Bend the 0.5mm spring steel base gently for stubborn prints—never use metal scrapers (avoids coating damage). Reinforced coating resists scratcheEffortless Demolding & Scratch-Resistant：Models peel off easily after the plate cools. Bend the 0.5mm spring steel base gently for stubborn prints—never use metal scrapers (avoids coating damage). Reinforced coating resists scratches for long-lasting use.s for long-lasting use.

Wide Compatibility & Easy Cleaning：Heat-resistant up to 120℃, works with PLA/PETG/ABS/TPU/PC/ABS-FR/PA12-CF etc. Clean with water and detergent; avoid acetone or organic solvents. Perfectly fits QIDI Max4 /QIDI Q2 printer.

QIDI Cool Plate Pro

One board for all, revolutionary experience

Excellent adhesion

QIDI Cool Plate Pro features a specially optimized nanoscale microporous texture that generates extremely strong adhesion to filaments during printing, ensuring "perfect first-layer adhesion" for a variety of materials, from PLA to PETG.

Effortless Demolding

After printing, the model is easily removed as the platform cools down.

Long-lasting durability, easy to clean

Made with a high-toughness polymer substrate and a reinforced coating, it is scratch-resistant and easy to clean.

Room temperature printing, energy-saving

Printing can begin without heating. This significantly reduces preparation time, allowing for immediate printing; PLA and PETG adhere well even at low heated bed temperatures, resulting in substantial long-term electricity savings.

Smooth texture and double the durability

The new surface treatment technology makes the bottom surface of the printed parts smooth and flat, which directly improves the texture; and the double-sided design makes it twice as durable.

Filaments Compatibility

Tips: PLA filaments offer the best adhesion; for other filaments, the printing plate temperature needs to be adjusted to improve adhesion, or a PEI plate may need to be used, depending on the model.

Printing Tips

1. After printing, please wait a few minutes for the platform to cool before removing the print. If the model does not detach completely automatically, remove the cold-print plate from the printer and gently bend the platform. Use flexibility to separate the bottom of the model from the platform. Never use a metal spatula to pry it off forcefully, as this may scratch the surface coating.

 2. Increasing the temperature of the heated bed can enhance adhesion. The temperature of the heated bed needs to be adjusted according to its specific requirements to achieve the optimal level of adhesion.

 3. Cold-print plates provide good adhesion without the need for adhesives or frequent cleaning. For heavily soiled surfaces, you can clean them with water and detergent. Do not use organic solvents (especially acetone) to clean the build plates, as they will damage the surface.

 4. Build plates are consumables and will age over time. The warranty only covers manufacturing defects and does not cover cosmetic damage such as scratches, dents, or cracks. Only sheets that are defective upon arrival are covered under warranty.

 5.When printing oversized objects on the MAX4, warping may occur at the standard calibration temperature. This issue can be mitigated by slightly increasing the printing temperature or enabling chamber heating. This board is ideally suited for energy-efficient, low-temperature batch printing of small-scale PLA models.