Bambu for Part / Cooling Fan / Chamber Heat Circulation Fan / Chamber Exhaust Fan/MC Board Fan

Cooling Fan for Hotend - H2 Series

The Cooling Fan for Hotend, situated between the TH board and extruder, cools the hotend to avoid premature filament softening and clogs.

Learn more about H2D and H2C Cooling Fan for Hotend on Bambu Lab Wiki.

Learn more about H2S Cooling Fan for Hotend on Bambu Lab Wiki.

In the Box

For H2D and H2C

- Cooling Fan for Hotend*1
- M2.5-8 Screw*2
- BT2.6-8 Screw*2

For H2S

- Cooling Fan for Hotend*1
- BT2-4 Screw*2

 Special note for H2S: If your product SKU is FAH047, please make sure to check the fan orientation before installation. If the orientation is incorrect, follow the Appendix steps to adjust it. If your product SKU is FAH047-V1, you can skip the appendix instructions and proceed with installation directly.

Compatibility

H2 Series

Part Cooling Fan for - H2 Series

The Part Cooling Fan, located at the toolhead's base, works in tandem with the Air Duct to swiftly cool extruded filament.

Installation

Learn more about H2D and H2C Part Cooling Fan on Bambu Lab Wiki.

Learn more about H2S Part Cooling Fan on Bambu Lab Wiki.

In the Box

For H2D and H2C

- Part Cooling Fan*1
- BT2.6-8 Screw*2
- BT3-20 Screw*2

For H2S

- Part Cooling Fan*1
- BT2-6.5 Screw*1
- BT2-5 Screw*2

Compatibility

H2 Series

Chamber Heat Circulation Fan

The Chamber Heat Circulation Fan is installed in the right inner lining of the printer. Its primary function is to maintain an even temperature throughout the chamber by circulating heated air, which helps ensure stable printing conditions and prevents temperature fluctuations during the printing process.

Installation

Learn more about Chamber Heat Circulation Fan on Bambu Lab Wiki.

In the Box

- Chamber Heat Circulation Fan*1

- BT4-32 Screw*4

- Double-Sided Tape*2

Compatibility

H2 Series

MC Board Fan - H2 Series

The MC Board Fan is used to regulate the temperature and dissipate heat for the MC board.

Installation

Learn more about MC Board Fan on Bambu Lab Wiki. https://wiki.bambulab.com/zh/h2/maintenance/replace-mc-board-fan

In the Box

- MC Board Fan*1

- Soft Screw*4

Compatibility

H2 Series

Chamber Exhaust Fan

The Chamber Exhaust Fan, mounted on the right inner liner behind the activated carbon filter, vents air from the printer's interior.

Installation
Learn more about the Chamber Exhaust Fan on Bambu Lab Wiki.

In the Box

- Chamber Exhaust Fan*1

- Soft Screw*6

- Active Chamber Exhaust*2

Compatibility

H2 Series