ANYCUBIC Air Purifier
No se pudo cargar la disponibilidad para recoger
Utilice este texto para fomentar la comunicación o promover el intercambio en las redes sociales.
•【𝐂𝐨𝐦𝐩𝐚𝐜𝐭 𝐁𝐨𝐝𝐲, 𝐒𝐩𝐞𝐜𝐢𝐚𝐥 𝐟𝐨𝐫 𝟑𝐃 𝐏𝐫𝐢𝐧𝐭𝐞𝐫𝐬】 Anycubic Pure, with a compact body of 4.5 x 1.8 x 1.8 inches, is less than the size of a small 250ml of coke. It can be placed anywhere on the 3D printer at your willing, with a built-in rechargeable battery, which can be used by pressing the power button. It's especially compact with ANYCUBIC LCD Printers.
• 【𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐭 𝐏𝐮𝐫𝐢𝐟𝐢𝐜𝐚𝐭𝐢𝐨𝐧】High Density Activated carbon has strong adsorption performance and filtering effect. Anycubic Purifier+ uses a high-density activated carbon filter with a thickness of 18 mm and a weight of 17 grams, which can effectively absorb the odor generated by the resin during the 3D printing process.
• 【𝐇𝐢𝐠𝐡 𝐒𝐩𝐞𝐞𝐝, 𝐋𝐨𝐰 𝐍𝐨𝐢𝐬𝐞, 𝐋𝐨𝐧𝐠 𝐋𝐢𝐟𝐞】In order to make the activated carbon fully effective, the Anycubic Purifier+ is equipped with a high-quality fan: with a high speed of 5,000 rpm, ≤ 40 decibels of operating noise, and ≤ 30,000 hours of operating life. Faster circulation, lower noise and more stable operation.
• 【𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐚𝐛𝐥𝐞 𝐅𝐢𝐥𝐭𝐞𝐫 𝐄𝐥𝐞𝐦𝐞𝐧𝐭】The high-density activated carbon filter element of the Anycubic Purifier+ has a replaceable design. The single activated carbon filter element can work continuously for 3-6 months. After the filter element life expires, the filter element can be easily replaced by simply removing the top cover. Replace the filter element in time, so that you can always breathe fresh and keep your body healthy during 3D printing.
• 【𝐋𝐨𝐧𝐠 𝐄𝐧𝐝𝐮𝐫𝐚𝐧𝐜𝐞, 𝐋𝐚𝐬𝐭𝐢𝐧𝐠 𝐅𝐫𝐞𝐬𝐡】The Anycubic Purifier+ has a built-in high-quality. Anycubic Purifier+ will keep you clean even when you need to continuously print a large model.
When resin fumes start to linger in your home workshop mid-print, the ANYCUBIC AirPure becomes your silent savior. Its high-speed fan pulls in toxic odors from your Photon M3, trapping them in the activated carbon filter—turning a stuffy room into a breathable space where you can print for hours without discomfort.
Tired of loud fans disrupting your focus? The AirPure’s low-noise design hums at just 35dB, quieter than a library whisper. You’ll barely notice it running while your Photon M3 prints, making it perfect for home offices or shared spaces where noise matters.
Swapping out the AirPure’s filter takes 10 seconds flat—no tools, no hassle. When the indicator light turns red, simply pop out the old filter and slide in a new one. For Photon M3 users printing daily, this means never skipping a session to deal with complicated maintenance.
Printing overnight? The AirPure’s rechargeable battery lasts up to 8 hours on a single charge, powering through even your longest resin prints. No need to plug it in near your printer—place it anywhere in the room, and it keeps filtering fumes until dawn, so you wake up to a fresh space.
When you’re racing to finish a batch of resin models, the AirPure’s high-speed mode kicks into gear. Its powerful fan cycles air 3x faster than basic purifiers, ensuring fumes don’t build up around your Photon M3—critical for maintaining consistent print quality and protecting your lungs.
【High Effective Ventilation】Anycubic Purifier 2.0 connects 3D printers to the external environment. Upon activation, it runs continuously to remove gases from the chamber. After 30 minutes of operation, the VOC content inside the machine cover can be reduced to below 0, effectively reducing the odor emitted by resin and filament during printing
【Wide Compatibility】Anycubic ventilation purifiers can be directly connected to the ventilation hole on Photon mono m7/M7 Pro/M7 Max; After printing some adapters, it can also be applied to Photon Mono 4/4 ultra, Anycubic kobra S1 FDM 3D Printer, and even other brands of resin 3D printers with ventilation hole
【Two at Once】Purification ventilation equipment supports the simultaneous purification of two 3D printers. Users can connect them through the print distribution port without installing additional purifiers, thereby optimizing the working environment and saving costs
【Silent Operation】The operating noise of the Purifier 2.0 is only 52 decibels, which is lower than the noise generated by a 3D printer during printing. In addition, when operating simultaneously, the noise does not overlap, thus avoiding additional noise and providing users with a comfortable printing environment
【Multi-scenario application】Equipped with a 3-meter-long exhaust pipe, the pruifier 2.0 provides a fixed exhaust outlet solution for different user scenarios, external holes, or different types of windows