GratKit Firefly Filament Dryer Box
Couldn't load pickup availability
Use this text to encourage communication or promote sharing on social networks.
MAX TEMPERATURE UP TO 70℃
Compatible with Nylon / PC / PETG filament. In particular, nylon materials are easily affected by moisture in the air. After the drying box reaches 70°C, it can be removed more easily, reducing the impact of moisture on the filament.
Air Heating Circulation System
With 5015 DC fan, the heating will faster than before and the heating more balanced and stable.
App Remote Control
Smart app control, the Tuya app support Up to 200+ countries/regions. Release your hand. Remote control it, check status, dry the filament at anytime and anywhere.
RGB Ambient LED
Lights-RGB ambient light allows you to check the remaining filament at any time at night. The multi-color matching makes your printing no longer boring and makes your device cooler.
Adjustable Drying Temperature and Time
GratKit Firefly filament dryer provides 8 built-in filament modes: PLA / PLA+ / PETG / ABS / Nylon / PC/ HIPS / TPU. One click and then start drying. It also supports custom time and temp(40~70℃). Set the time to 0:00 to always be in a dry state. Hanging Spool Design-Hanging spool design, same method of your printer. Less friction and it can support 250g/500g/1000g filament with 72mm width filament.
Safety Protection
We have embedded a level sensor on the motherboard of GratKit Firefly Filament Dryer. When the drying box is tilted beyond 45°, such as accidentally tipped over, the motherboard will turnoff the heating. Once you have it flat again, you can start turning the heated drying filament back on.
Smart temperature control system-We added a sensor at the bottom and top to control the heating by calculating their difference. It can effectively prevent damage to your filament spool plate from overheating. Also, with a hanging spool holder design. Heating is more balanced and stable.
Material: PC+ABS
Compatible Filament: all filament types
Preset Filament Types: PLA, PLA+, PETG, ABS, NYLON, PC, HIPS, TPU
Compatible Spool Sizes: width≤72mm
Operating Environment: 0-45°C
Heating Temperature Range: 40-70°C
Display Screen Size: 3.5 inches
Noise Parameter: <50dB
Maximum Power Consumption: 48W
Standby Power Consumption: 3W
Maximum Current: 2A
Power input: DC24V-2A
Power Adapter: AC100-240V to DC24V-2A
Item Dimensions:254x261x102mm
Item Net Weight: 760g
GratKit Firefly Dryer Box
| Stepper Motor 42 | 238 x 102 x 261mm | Package Size | 241 X 105 x 268mm |
|---|---|---|---|
| Dryer box Net Weight | ~760g | Filament Weight | <1000g[Net] |
| Filament Diameter | 1.75mm/2.85mm/3mm | Power Adapter | AC100-240V to DC24V-2A(48W) |
| Max Capacity | Φ200x72（H)mm | Settable temperature range | 40-70℃ |
| Operating Environment | 0-45℃ | Noise Parameter | <50dB |
| Ambient Light | Controllable RGB light | Display Screen | 3.5 inch LCD Screen |
| Filament Types | PLA/PLA+/PETG/ABS/Nylon/PC/HIPS/TPU... etc. | Operation Type | Touch Control / WIFl App/Control /Bluetooth App Control |
About repaired version:
1. Since the product is a repaired version, there may be some flaws in the appearance of the product. You should lower your expectations for this part.
2. Function and use are normal.
3. Terms of warranty
1) For the appearance part, please refer to Article 1
2) The functional warranty terms remain unchanged and the time is 1 year.
4. Thank you for your support
Tech Specs:
Material: PC+ABS
Compatible Filament: all filament types
Preset Filament Types: PLA, PLA+, PETG, ABS, NYLON, PC, HIPS, TPU
Compatible Spool Sizes: width≤72mm
Operating Environment: 0-45°C
Heating Temperature Range: 40-70°C
Display Screen Size: 3.5 inches
Noise Parameter: <50dB
Maximum Power Consumption: 48W
Standby Power Consumption: 3W
Maximum Current: 2A
Power input: DC24V-2A
Power Adapter: AC100-240V to DC24V-2A
Item Dimensions:254x261x102mm
Item Net Weight: 760g