BIQU CryoGrip Pro Frostbite Panda Cold Build Plate

Snapmaker U1 Panda Build Plate

【Perfect Compatibility】BIQU CryoGrip Pro Frostbite Cold Build Plate is compatible with Snapmaker U1 3D Printer which has ice blue coating and scratch-resistant & self-recovering for ultimate durability.

【Room-Temp with No Glue Printing】CryoGrip Pro Frostbite Cold Build Plate delivers unparalleled adhesion for PLA(30-50℃) and PETG(50-70℃) at room temperature, while it also compatible with ABS(100℃), saving heating bed time, hourly power saving 50W/h and clog free.

【Excellent Adhesion and Zero Heat】CryoGrip Pro Frostbite Panda Build Plate has unparalleled adhesion. The substrate has high magnetism, strong adsorption and fixation, reducing warping of large prints and remaining scratch. No more worrying about the edge of the build plate lifting during large prints.

【Easy to Removable and Clean】The printed model can be. easily removes by bending the plate. If a print sticks too firmly, please place the plate in a freezer for 10 minutes to assist with removal. A simple wipe with water+soap can easily restore its adhesion, do not use solvents(e.g., alcohol) as these may cause permanent surface damage.

【Special Material Texture Printing】 CryoGrip Pro Frostbite Build Plate sandwiched with 7 layers. The base and intermediate coating are respectively a highly active adhesion layer and an ice blue ultra-high temperature light cured sintered layer, bring impact resistant, corrosion resistant, long life span, zero risk of repeated bending causing coating to peel off.

Effortless Print Removal

CryoGrip Pro Series can easily removed by bending the plate. For larger or more complex printed materials, use a scraper to gently lift the edges and pry them out carefully. If a print sticks too firmly, place the plate in a freezer for 10 minutes to assist with removal.

Easy Cleaning Methods

CryoGrip Pro Frostbite provides strong adhesion without the need for adhesives or frequent cleaning. If heavey dirt accumulates, clean the surface with water and soap. (NOTE: CryoGrip Pro Frostibite CAN'T use alcohol to clean the surface.)

【Room Temp Cold Printing】BIQU CryoGrip Pro Frostbite Panda build plate boasts revolutionary 7-layers design and unique polymer material which help it to realize room temperature printing with firm adhesion. It also helps to vastly improve print success and save energy. Frostbite build plate ensures warp-free printing of PLA & PETG, allowing you to keep the auxiliary fan on and eliminates concerns about drafts affecting your prints.

【Unmatched Adhesion, Zero Heat】BIQU Frostbite cold print build plate is compatible with PLA at a low temperature range of only 30-50℃, and PETG at only 50-70℃. It highly surpasses traditional PEI steel spring sheets as per prints adsorption in cool printing with PLA and PETG. Its superior first-layer adhesion helps you to keep away from glue, edge warping and print falling off.

【Cool and Clog Free】Uniquely designed to print PLA at ambient temperatures, the CryoGrip Pro Frostbite prevents your filament from softening and slipping in the extruder due to high chamber temperatures. With the breakthrough cold printing technology of CryoGrip Pro build plate, you can save 50W/h of power compared to traditional PEI build plate in printing that needs bed heating. Half energy can be saved!

【Effortless Prints Removal】BIQU Bambu-Lab build plates enable easy prints removal. Slightly bend the surface of the build plate, then your prints will detach cleanly, no need of any scraping or prying tools. It is compatible with K1 Max 3d printer.

【Easy to Clean】 Use only water and soap to clean the build plate surface. DO NOT use solvents like alcohol since they may cause permanent surface damage. With our self-recovering coating, a simple wipe will restore its adhesion, ensuring confident performance every time.