Timing Belt Elastic Tensiometer

2GT timing belt elastic tensiometer Voron Synchronous Belt Tension Gauge Tester Detection Measurement

Are you still worried about the printing effect is not good, the adjusting machine is not good, and the belt tension is not correct?

Belt tension adjustment is the most important, related to the grain of the model.

BLUE TYPE: 3D printer belt tensiometer reference value

• The normal 2GT-6MM belt tension calibration reference value is about 5.2, Gates is about 5.3, and the high temperature non-slip belt is generally about 5.4
• The normal 2GT-9MM belt tension calibration reference value is about 6.2, Gates is about 6.3, and the high temperature non-slip belt is generally about 6.4

Conditions and methods of use of BLUE TYPE 3D printer belt tension meter:
1. your machine belt must be leaked outside the machine, there is enough measurement space.
2. Slide the print head to one side and measure the middle position of the belt.
3. After resetting the measuring instrument, press down the measuring button, lift the probe, clamp the belt in, place the belt on the two metal posts, and then release the measuring button to get the tension value of the belt.

BLACK TYPE: 3D printer belt tensiometer reference value

• The normal 2GT-6MM belt tension calibration reference value is about 9, Gates is about 8.9, and the high temperature non-slip belt is generally about 8.8
• The normal 2GT-9MM belt tension calibration reference value is about 8, Gates is about 7.9, and the high temperature non-slip belt is generally about 8

Conditions and methods of use of BLACK TYPE 3D printer belt tension meter:
1. your machine belt must be leaked outside the machine, there is enough measurement space
2. For the first time use, please pull out the measuring gauge handle completely and then press the reset button, raise the probe and then snap the belt into it, place the belt on the two metal pillars, and then release the measuring handle to get the tension value of the belt

Comparison of the characteristics of the two models:
Blue type: easy to measure by pressing, suitable for large 3D printers with external belts over 300MM print area.
Black type: upgraded with more accurate metal probe and improved measuring head, it can easily adapt to more demanding measuring conditions, and 90% of large and small 3D printers can be easily measured.