Support for ABS for Bambu Lab

Easy Support Removal
Superior Support Interface Quality
Comes with High Temperature Reusable Spool
Diameter: 1.75 mm +/- 0.05mm

Cautions for Use

ONLY used for support
Optional to Dry before Use
Enclosure Printers Required
AMS Compatible
AMS lite NOT Compatible

 Note: Before printing, please kindly refer to the Support for ABS Printing Guide | Bambu Lab Wiki for optimal results.

Bambu Support for ABS

Enhance your ABS printing experience with our innovative support material. Designed for effortless printing and hassle-free removal, this material ensures a flawless support interface every time. Fully compatible with the AMS systems, it streamlines your ABS printing process from start to finish. Say goodbye to tedious support removal and enjoy a smoother, more efficient workflow!

Easy Support Removal

Specially formulated for ABS, our support material adheres precisely to the ABS surface, allowing for easy support removal. This streamlines your post-processing work, ensuring a more efficient workflow.

Superior Support Interface Quality

Support for ABS enables a 0 Top Z distance and 0 Top interface spacing when printing, ensuring a scar free support surface. This enhances the sharpness of details, improving the overall appearance and integrity of your final prints.

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Parameters Comparison

Learn more different filaments comparison on 3D Printer Filament Comparison Guide | Bambu Lab

Accessory Compatibility

Printing Tips

• Support for ABS is soluble in limonene. Please pay attention to the usage norms and safety.

• Pungent and unpleasant odors may be released during printing. Make sure your printer is enclosed and placed in a well-ventilated area.

• When layer strength is required, it is recommended to increase the flushing volume to above 800 mm³. If the flushing is not thorough, it may reduce the layer adhesion of the model at surfaces that are on the same horizontal plane as the support surface.

• By increasing the "initial layer speed", a more peelable support can be obtained. However, this will increase the risk of warping.

• Dry out before use for higher print quality. Drying conditions: 80℃ for 4 hrs in the blast drying oven; 85 - 95 ℃ for 6 hrs in the X1 Series Heatbed. Please refer to Filament Drying Recommendations | Bambu Lab Wiki on WIKI.

• For more support-related settings, please refer to Support on WIKI.