Spare Parts for QIDI Q2

Q2 Print Head Cable (6pin)

Durable Material Structure: Made with reliable materials and precision manufacturing, featuring stable construction, accurate dimensions and convenient installation for long-term use.

Stable Printing Performance: Helps improve printer operation stability with consistent performance, smooth operation and reliable support for daily 3D printing tasks.

Easy Installation Design: Designed for simple replacement and maintenance, allowing users to install the component efficiently with basic tools and reduce downtime.

Polar Cooler

Clog-Free Printing

Improved Print Quality

Built-in condensate filter for dry, clean air

Effective Cooling achieve air temps as low as 10°C

Effortless Installation

Compatible 3D Printer: Q2

Cautions for Use

When using active chamber heating with the Polar Cooler together, do not set the chamber temperature above the filament's softening point. For PLA, keep chamber temperature ≤ 45 °C to prevent clogging and print defects.

3-in-1 Air Filter

This 3-in-1 air purification component integrates G3 pre-filter, H12 HEPA filter and activated carbon filter, forming a full-range protection. G3 pre-filter blocks hair, dust and other large particles; H12 HEPA filter captures 99.5% of particles above 0.3μm, reducing printing dust diffusion; coconut activated carbon effectively absorbs VOCs and odors generated by heating PLA, ABS, PETG and other consumables.

Cautions for Use

Recommended replacement cycle: 500-800 hours of cumulative printing (shortened to 300-500 hours for high-dust consumables such as carbon fiber, nylon).

Q2 Hotend Cooling Fan

The Hotend Cooling Fan cools the hotend to avoid premature filament softening and clogs.

Q2 Model Cooling Fan

The Part Cooling Fan, located at the toolhead's base, works in tandem with the Air Duct to swiftly cool extruded filament.

Q2 Auxiliary Fan

The Q2 Auxiliary Fan is a 4-Pin PWM Fan with RPM Feedback installed on the left side of the chamber, providing better cooling conditions for high-speed printing.

Q2 Camera

The camera is a low frame rate camera that enables remote live broadcast and time-lapse shooting.

Working Temperature:  -20°C to 70°C

Resolution Ratio: 1920*1080

Maximum Image Transfer Rate: 1-30fps

EFL: 2.3mm

FOV: 130°±15° 

F/No: 2.0

Q2 Extruder

The Q2 extruder features hardened steel double gears to increase extrusion force and prevent slipping.

durable and wear - resistant.

Highly practical and easy to install.

Q2 Filament Runout Sensor

This sensor is used in the Extruder to detect the presence of the filament, and also detect the Filament Cutter lever.

Q2 Bimetal hotend

It is recommended to use only one type of filament in a single nozzle. Switching between multiple filaments in one nozzle may cause nozzle blockage.

Q2 Adapter Plate

Optimize electrical connections, improve stability and scalability.

Q2 AP Board

High-performance control - handles complex motion algorithms (such as high-speed printing, closed-loop control) to improve printing accuracy and speed.

Multi-tasking - manages printing, temperature control, network communication, camera monitoring and other tasks at the same time.

Intelligent expansion - supports advanced functions such as Wi-Fi/cloud control, multi-sensors, AI detection, etc.

Q2 Motherboard

The motherboard is responsible for coordinating the work of all hardware components to ensure the precise execution of the printing process.

Q2 Dual-Sided PEI Plate

1. Double-sided design for durability.

2. Strong magnetic base for stability and convenience.

3. Imported high-quality PEI material with excellent PEI coating performance, hot-attach and cold-detach.

4. Easy to clean with anhydrous alcohol wipe.

5. Surface temperature resistance：up to 120℃.

6. Overall dimensions: 280 x 280 mm.

Precautions：

Dust and grease accumulation on the build plate will reduce adhesion. Regular cleaning of the build plate surface with detergent and water is recommended to maintain optimal adhesion.

Increasing the hot bed temperature can enhance adhesion. Users should adjust the hot bed temperature according to their specific needs to achieve optimal adhesion.

Before removing a printed model, always wait a few minutes for the build plate to cool, allowing for easy removal. This prevents damage to the build plate and ensures a long product life.

This item is a consumable part and will degrade over time.

Dual-Sided Smooth Plate

Smooth and Matte Surface Finish.

Compared with ordinary PEI board, it provides a smoother printing texture and a smooth surface for your prints.

Q2 Screen

4.3-inch IPS capacitive touchscreen which connects to the Mainboard which is used to control the printer through the touchscreen interface.

[Clear Display] This screen shows printing data clearly and helps you monitor every step of the printing process easily.

[Easy Installation] It fits well with matching printers and lets you finish replacement quickly with simple steps.

Q2 Hotend Silicone Sock 

Cautions for Use

The Q2 hotend heats up rapidly and reaches extremely high temperatures. Before replacing or performing maintenance, you must wait until the hotend cools down completely to room temperature, or use heat-resistant tweezers/needle-nose pliers for assistance.

During continuous ultra-high-temperature printing above 300°C, the degradation rate of the silicone will accelerate. If the silicone sock turns white, hardens, loses elasticity, or develops damaged edges, replace it promptly to prevent debris from falling onto the print bed.

Q2 Cutter Blade

Q2 Cutter Blade is used to cut the filament when replacing the filament or switching between multiple colors.

Q2 Wiper Silicone Case

The Wiper Silicone Case is used to clean the hot nozzle before starting a print job.

QIDI Q2 BOX Hub Filament Selector With Signal Cable

0.2mm+0.4mm+0.6mm+0.8mm

Engineered for Extreme Materials & Temperatures.

Precision-Machined for Flawless Prints.

Built for Longevity Under High Load.

Cautions for Use.

It is recommended to use only one type of filament in a single nozzle. Switching between multiple filaments with significant temperature differences may cause nozzle blockages.

Q2 Tungsten Carbide Bimetal Nozzle

Integrated Quick-Release

Extreme Wear Resistance

Specialized for Abrasive Materials

Excellent High-Temperature Tolerance

Long-lasting High Precision

Cautions for Use

It is recommended to use only one type of filament in a single nozzle. Switching between multiple filaments with significant temperature differences may cause nozzle blockages.