Pink PLA Filament, 1KG Spool
Couldn't load pickup availability
Use this text to encourage communication or promote sharing on social networks.
Dimensional Accuracy & Consistency:
These tough PLA filaments have very strict tolerances. Diameter is 1.75mm with a dimensional accuracy of + / - 0.02mm 1 kg spool (2.2lbs).
Recommended Print Settings for PLA Filament:
Extrusion/Nozzle Temperature 215-220℃;
Bed Temp: 70℃.
Wide Compatibility：
Works perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy.
Specifications:
Material: Pink PLAColor: Pink
Diameter: 1.75mm
Filament Weight: 1kg / roll
Spool Weight: 140±7g
Spool Diameter: 200mm(8.87in)
Spool Inner Hole Diameter: 60mm (2.36in)
Spool Width: 58mm
Package includes:
Pink PLA 1kg * 2 pack
Filament Specifications:
1.75mm +/- 0.05mm in diameter
Recommended Print Settings:
• Extruder Temperature(℃): 185-205℃,
• Bed temperature: 45-60℃
• Fan Speed: 100%
• Printing Speed: 40-100mm/s
• Heated Bed: Optional
More information of PLA
CLICK HERE
FAQ
| PLA | PETG | Rapid PLA | |
|---|---|---|---|
| RECOMMENDED NOZZLE TEMP: | 190°C - 220°C （recommended 205°C） |
220-260°C （recommended 220°C） |
200-230°C （recommended 220°C） |
| RECOMMENDED HEATED BED TEMP: | 50-65°C | 80-80°C | 40-60°C |
| PRINTING SPEED: | 30~70mm/s | 30~600 mm/s | 30~600 mm/s |
| PRINT LAYER THICKNESS: | 0.2mm | 0.2mm | 0.2mm |
| RECOMMENDED PLATFORM: | Glass/Fiberglass Board/PVP glue stick or textured paper | Glass/Fiberglass Board/PEI+PVP glue stick or platform spray | Glass/Fiberglass Board/PEI+PVP glue stick or platform spray |
| DIMENSIONAL ACCURACY 99% PROBABILITY: | +/- 0.02mm | +/- 0.02 mm | +/- 0.02 mm |
| NET WEIGHT: | 1 kg/spool (2.2 lbs) | 1 kg/spool (2.2 lbs) | 1 kg/spool (2.2 lbs) |
| DENSITY: | 1.2（g/cm³） | 1.27（g/cm³） | 1.2（g/cm³） |
| TENSILE STRENGTH (X-Y) : | ≥ 50（MPa） | ≥60（MPa） | ≥60（MPa） |
| ELONGATION AT BREAK (X-Y) : | 11.2 (%) | 19 (%) | 19 (%) |
| BENDING MODULUS : | 1913（MPa） | 2680（MPa） | 2680（MPa） |
| BENDING STRENGTH : | 91（MPa） | 80（MPa） | 80（MPa） |
| CHARPY IMPACT STRENGTH : | 5.4（kJ/m²） | 3.85 (KJ/m²) | 3.85 (KJ/m²) |
| MELT INDEX: | 14(190℃/2.16kg)g/10min | 8.2(190°C/2.16kg)g/10min | 8.2(190°C/2.16kg)g/10min |
| THERMAL DISTORTION TEMP: | 53°C (0.45MPa) | 53°C (0.45MPa) | 53°C (0.45MPa) |
| FAN: | 100% | 100% | 100% |
| ROCKWELL HARDNESS: | 88 | 88 | 88 |