Copper / Brass / Bronze Multicolor PLA

Copper/brass/bronze multicolors PLA 1.75mm 1kg(2.2lbs) for ender3.

It is suggested that the nozzle should be used at a temperature of 195-215℃. If hairy when printing, adjusted gradually by 5-10℃ each time. The platform can be glass, acrylic plate or PEI sheet, heat bed temp 50-70 ℃.

To prevent filament tangling, make sure to secure the filament end either within the spool's designated hole or elsewhere after 3D printing. In case the filament end accidentally slips past during extrusion, rewind the filament to check for any potential tangles.

In order to reduce possible warping of the first layer, we recommend preheating the hot bed temperature to 55-65℃, reducing the printing speed of the first layer to 25mm/s, and setting the line width to 0.6mm or the flow rate to 150%, excessive fan cooling in cooler weather will worsen edge warping.

PLA filament 1.75mm, net weight 1kg. Vacuum sealed and includes silica desiccant.