Liquid Cooling Kit for Creality K1 / K1C / K1 MAX

trianglelab CHCB-LC OTC Liquid Cooling Kit for Creality K1 K1C K1MAX High temperature printing compatible with carbon fiber ABS

This kit is a liquid cooling solution designed for the K1series printers. It prevents filament thermal creep caused by overheating of the extruder motor or hotend, which is common in closed chambers. Experiments have shown that at 53 degrees Celsius in the chamber and 28 degrees Celsius in the room, it is possible to keep the heatbreaker temperature at 31 degrees Celsius and the surface of the extruder motor at 41 degrees Celsius.

Highlights
1.Simple and easy to install
2.Less prone to leaks
3.Motor and hotend can be cooled simultaneously
4.Ensure effective cooling

Compatibility: Creality K1, K1 Max, K1C

Attention
This kit is only compatible with K1 series printers that can be fitted with creality unicorn nozzle. If your printer is from an earlier batch you may not be able to use this kit directly. You can purchase an additional CHCB OTC heater block to make this kit compatible. If you are unsure you can inquire before placing an order.

Warning
This kit does not include a water pump and radiator. The pump, reservoir and radiator
used in general PCs are compatible. If you don't want to DIY, you can consider purchasing our liquid cooling module.

Testing Report
Room temperature：28℃
ABS Printing
Top cover closed
Back fan outlet blocked
Side fan off
Bed temperature: 100℃
Hotend temperature: 265℃
Chamber temperature: 60℃
Extruder motor up surface temperature: 49℃
Heat breaker(cold side) temperature: 33℃

CHCB-OTC K1C
CHCB-OTC K1C Hotend*1
MK8 ZS Standard Nozzle 0.4mm*1
CHCB-OTC SOCKS*1
Thermistor: 100K B3950