LED Top Riser X1C and P1S with Cooling Sliding Vents Glass for BambuLab

LED Top Riser , Compatible for BambuLab X1C and P1S with Cooling Sliding Vents Glass Top LED Enclosure Ventilated Grid high-brightness LED

The X1C P1S LED top riser stand perfectly matches the machine, with shock-absorbing foam on the glass position and a 12V LED high-brightness light strip (featuring internal wiring with no exposed lines).

Available in two colors: silver and black. The silver option pairs perfectly with the X1CC, while the black is compatible with the P1S. There are no obvious layer lines, with hidden wiring, dual switches, four fans, and two ultra-bright COM light beads. The light color is vibrant, and the brightness is impressive!

[High-Brightness LED Illumination] Lights up the print chamber with clear, uniform brightness, allowing easy monitoring of 3D print progress

[Effective Cooling Vents] Sliding ventilated grid regulates chamber temperature, preventing overheating during long printing sessions

[Durable Glass Top Design] Tempered glass surface resists scratches and heat, providing a clear view while protecting internal components

[Enhanced Print Visibility] Illuminates fine details and layer adhesion, helping detect print issues early to reduce failures

[Tool-Free Installation] Easy to attach and remove with secure fitting, ideal for quick setup and daily 3D printing use

1.Remove the accessories and arrange them as shown in the diagram.

The stand with the fan is located at the back of the printer, while the stand with the LED light is placed on both sides of the printer. Please pay attention to the position of the power plug for the LED light when setting up.

2.Install the four corners of the bracket. The corner piece with the thermometer hole should be placed at the front left of the printer.

3.The corner piece with the switch button is located at the front right of the printer.

4.The LED light switch has two sets of wires, and either set can be connected. The fan has only one set of wires.

5.Install the remaining corner pieces.

6. Connect the plugs of the LED light and the fan, and conduct a power-on test.

7. Install the baffle; the back of the baffle has magnets. Simply align it and insert it.

8.Insert thermometer

9. Secure the electric wire in the groove using adhesive tape.