High Flow Hotend for Bambu- H3C

Real High Flow: Save Up to 30% of Your Time

The Bambu High Flow Hotend's optimized melt zone enables significantly increased volumetric speed, achieving up to 62.5%1 higher max volumetric speed and reducing print time by up to 30%2 with ease. The larger your model, the more time you save—especially for prints with extensive infills.

1. Tested with ABS, Ø240mm single-wall cylinder, 0.2mm layer height, 1.0mm outer wall, 280℃ nozzle temperature, spiral vase mode on.

2. Tested with PLA Basic, 15% infill, 300x300x300mm cube.

High-Speed Precision: Sharp Details Every Time

Say goodbye to under-extrusion, rough surfaces, and loss of detail. Unlike standard high-flow hotends, Bambu's high yet consistent extrusion ensures crisp edges, flawless texturing, and ultra-smooth surfaces—every single time.

Upgrade now and print faster without compromise!

Built for the filaments that fight back.

Carbon fiber, glow-in-the-dark, metal fill — abrasive filaments chew through brass nozzles and take your dimensional accuracy with them. This one is hardened steel at HRC 55+, hardened through rather than coated, so the orifice holds its shape print after print. Print what you want, and stop thinking about the nozzle.

Filament Compatibility

Note:

PLA Silk Dual Color is prone to flipping during multi-color printing, which can cause color bleeding in the model. Please avoid using it for multi-color prints.

The 2.85 mm hotend can only print 2.85 mm flexible filaments. Bambu Studio currently provides only two presets: Bambu TPU 75A (2.85 mm) and Generic TPU (2.85 mm).

In the Box

- High Flow hotend *1

- M2x5 screw *3

- Toolhead motor unlock sleeve *1