for Bambu Air Filter- H2D/H2D Laser

Compatible: For Bambu Lab H2D 3D Printer Air filter, size is 175*150*25mm.

Efficient purification: Adopts activated carbon and melt-blown fabric multi-layer filtration system to effectively absorb volatiles, smoke and odors generated during 3D printing.

Improve adsorption efficiency: Lab H2D Air Filter adopts honeycomb structure inside to increase contact area and enhance adsorption capacity.

Usage time: A single filter element can be used for about 140 hours of continuous printing, and it is recommended to replace it every 60 days.

Installation: Lab H2D carbon filter sheet is installed on the inside of the right panel of the printer, close to the printing cavity.

for Bambu Lab H2D and H2D Laser 3D printers, this air filter cartridge for Bambu Lab installs easily on the right inner panel near the chamber to ensure targeted VOC and particle filtration.

Advanced Filtration Technology: Combining melt-blown fabric with a honeycomb filter mesh, this 3D printer activated carbon air filter captures micron ultrafine particles generated during printing(e.g. PLA, PETG, ABS, ASA printing filament residues).

Note:

The H2D activated carbon air filter housing is equipped with a detachable activated carbon filter cover. When replacing the activated carbon filter, you need to remove the activated carbon filter cover first. There is a filter screen inside the activated carbon filter cover to prevent debris in the printer cavity from passing through the activated carbon filter cover and damaging the cavity exhaust fan.