P1/X1 Series Heatbed Sensor Unit Hot Bed Pressure Kit For Bambu Lab
Couldn't load pickup availability
Use this text to encourage communication or promote sharing on social networks.
The heatbead sensor unit is a piezoelectric ceramic with a bracket installed, and is used to detect the condition of the surface pressure on the heatbed. There are 3 sensors installed on the bottom of the heatbed. More precise heat bed pressure, brings more perfect printing projects.
If the following three conditions are met simultaneously, or if there is obvious physical damage to the sensor, you need to replace the sensor: You receive an error message stating, "The sensitivity of heat bed force sensor 1/2/3 is too low. The electronic connection to the sensor may be broken." Or You have followed the HMS guide for troubleshooting but have not resolved the issue.
Please carefully follow the steps listed in the pictures for replacement or search “Replace the Heatbed Sensor Unit” at BambooWIKI. Make sure the machine is powered off before beginning any disassembly and assembly procedures.
The heatbead sensor unit is a piezoelectric ceramic with a bracket installed, and is used to detect the condition of the surface pressure on the heatbed. There are 3 sensors installed on the bottom of the heatbed.
Installation
Learn more about the replacement of the Heatbed Sensor Unit for X1 series and P1 Series on Bambu Lab Wiki.
In the Box
- Heatbed Sensor Unit*1
Compatibility
X1 Series and P1 Series
Product Specifications
