for ANYCUBIC Purifier 2.0

【High Effective Ventilation】Anycubic Purifier 2.0 connects 3D printers to the external environment. Upon activation, it runs continuously to remove gases from the chamber. After 30 minutes of operation, the VOC content inside the machine cover can be reduced to below 0, effectively reducing the odor emitted by resin and filament during printing

【Wide Compatibility】Anycubic ventilation purifiers can be directly connected to the ventilation hole on Phot

on mono m7/M7 Pro/M7 Max; After printing some adapters, it can also be applied to Photon Mono 4/4 ultra, Anycubic kobra S1 FDM 3D Printer, and even other brands of resin 3D printers with ventilation hole

【Two at Once】Purification ventilation equipment supports the simultaneous purification of two 3D printers. Users can connect them through the print distribution port without installing additional purifiers, thereby optimizing the working environment and saving costs

【Silent Operation】The operating noise of the Purifier 2.0 is only 52 decibels, which is lower than the noise generated by a 3D printer during printing. In addition, when operating simultaneously, the noise does not overlap, thus avoiding additional noise and providing users with a comfortable printing environment

【Multi-scenario application】Equipped with a 3-meter-long exhaust pipe, the pruifier 2.0 provides a fixed exhaust outlet solution for different user scenarios, external holes, or different types of windows