Flsun Speeder Pad Klipper Firmware Screen

Flsun Speeder pad is a highly integrated 3D printing device with pre-installed full Klipper firmware. It's applicable on most FDM 3D printers and aims to increase printing speed by 2 to 5 times with ensured printing quality. It eliminates the need for a Raspberry Pi. This tablet is going to allow you to install Klipper on nearly any 3D printers.

In the package, you’re going to find some wires the speeder pad and an accelerometer, which is going to allow you to print faster with no quantity loss. You can install up to three printers on one Speeder pad with three USB ports.

Features: 
1. Pre-installed full Klipper firmware
2. Supports almost all FDM 3D printers with 9 types configured by default
3. Control access to multiple platforms including PC, Pad, and mobile
4. 7-inch touch screen with 1GB+16GB large memory and WIFI module for online printing

* How to Set Up and Use the FlSun Speed Pad on Your KINGROON 3D Printers
 
Parameters:
Working Voltage: 12-24V
Power Interface: DC-4017
Touch Screen: 7 inch
Screen Size: 154.21*85.92mm
Resolution: 1024*600pixel
Frequency: 1.6 GHz
Perspective: wide angle
CPU Processor: R818 (quad core A53)
Operation System: Ubuntu 18.04 (Linux 4.9)
System: Flsun 1.0
GPU: GE8300
RAM: 1G
EMMC: 16G
Support: Ethernet / Wifi / Bluetooth / Microphone / Headset / etc
 
Packing:
Size: 23*24*9cm
G.W: 1.5kg