Filament Dryer Box with Real-Time Monitoring

Filament Dryer Box
Airtight and Moisture-resistant Real-time Monitoring Fully transparent design.

Once treated with drying technology, the storage of printing consumables prevents issues such as stringing, clogged nozzles, or air bubbles caused by moisture during usage

The drying agent consists of transparent silicone moisture-proof beads, which can be reused multiple times(After absorbing a certain amount of moisture ,moisture-proof beads need to be dried or exposed to sunlight in order to eliminate the moisture before they can be reused.)

External Dimensions:
Length:254mm Width:127mmHeight: 237mm

The thickness of the tray supports up to 79mm
The diameter of the tray supports up to 210mm

The rotation method fixed in the middle of the tray rotates too fast, causing many turns of filaments to be loosened in advanceIt is easy to cause problems such as filament jamming and winding, making it cumber some and difficult to replace.

Pulling out as much filament as needed for the extruder to rotate the spool
prevents issues such as jamming and tangling, and makes changing filaments easier.

Instructions

1.Place the desiccant, thermohygrometer and the shaft into the bottom
2.Load printing consumables into
3.Thread the guide tube into the hole
4.Put the filament through the guide tube and close the lid