Polymaker Fiberon PPS-CF10

Fiberon™ PPS-CF10 is a carbon fiber reinforced PPS (Polyphenylene sulfide) filament, with minimal warping during mechanical strength, high heat resistance, chemical resistance, printing and no need for a heated chamber. With exceptional V0 flame retardancy, and moisture insensitivity, it's specifically designed for professionals operating in extreme conditions.

Printing Temperature: 310˚C - 350˚C
Build Plate Temperature: 80˚C - 90˚C
Chamber Temperature: Room Temperature
Printing Speed: up to 300mm/s
Cooling Fan: OFF

Direct Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Indirect Drive:
Retraction Distance: 6mm
Retraction Speed: 60mm/s

Recommended Drying Settings:
Regular Oven: 100˚C for 10h
PolyDryer: Level 3 for 18h (PolyDryer™)
(Only if the material has absorbed moisture)

Annealing Settings: 125˚C for 16h

Fiberon by Polymaker: A new product line dedicated to democratizing high-performance composite materials. This cost-effective 3D printing filament is optimized for high-speed printing and offers excellent printability and compatibility with most mainstream and entry-level printers, enabling the production of high-performance parts.

Extreme Heat Resistance: Fiberon PPS-CF10 filament offers exceptional heat resistance above 250°C, with flame retardancy meeting the UL94 V0 standard. This 3D printing filament is ideal for a wide range of applications, including electronics and aerospace molding.

Tangle-Free & Moisture-Free: Fiberon PPS-CF10 filament in 1.75 is carefully wound to prevent tangling and is vacuum-sealed in a resealable ziplock bag with a desiccant. After use, guide the filament through the fixed hole to avoid tangles.

Good Layer Adhesion & Rigidity: Fiberon PPS-CF10 1.75 filament is a reliable black 3D printing filament that prevents warping, jamming, blobs, and layer delamination. It offers excellent bed adhesion, consistent color, and precise dimensional accuracy. Note: Turn off the fan for the first layer to enhance bed adhesion.

Cardboard Spool with Enhanced Hard Edge: Fiberon filament is packaged with upgraded materials, featuring a reinforced edge coating and a fully recycled cardboard spool and box. The hard edge prevents dust damage and protects against deformation and delamination.