Chamber Heater with APP for Bambu Lab P1 / X1

The chamber heater offers an additional chamber temperature heating APP control feature, with a max chamber temperature of 77℃. Higher chamber temperatures can reduce warping when printing high-temperature filaments and improve interlayer adhesion. Additionally, when printing with these high-temperature filaments, using the chamber heater can improve the print strength, particularly interlayer strength. For filaments such as PC, PA-CF, PAHT-CF, PET-CF, PPA-CF, PPS, and PPS-CF, setting the chamber temperature to 60°C can enhance dimensional accuracy and visual quality.

• Maximum temperature: 80°C
  

• The heater shell was printed with ABS-GF from Bambu Lab

• Compatibility: for Bambu Lab X1, X1C, P1S, P1P; Voron Trident, (size NOT suitable for Voron 2.4); Creality K1, K1C, K1 Max, K2, K2 Plus 3D printers, etc.

• Remote Control with APP: Sinilink

Warning: It is strongly recommended not to enable high chamber temperature when printing PLA, PETG, TPU, PVA and other low-temperature filaments. Enabling high chamber temperature may cause these filaments to soften and become lodged in the extruder, resulting in clogging issues.

Recommended chamber temp for various filaments

Chamber temp for PLA, PETG, TPU, PVA, PLA's supports and other low-temperature filaments: OFF

Chamber temp for ASA, ABS: OFF

Chamber temp for PC, PA, PA-CF, PAHT-CF, PA6-CF, PET-CF, PPA-CF, PPA-GF, PPS, PPS-CF and other high-temperature filaments: 60 ℃

Specifications:

Maximum temperature: 80°C
Size: 21x12x5cm
The heater shell was printed with ABS-GF from Bambu Lab
Rated Voltage: 220V / 110V for Japan
Rated Power: 150W