H1H PEO PEY PEI for Creality K1 / K1 Max / Ender 5 S1 / Ender 3 S1
Couldn't load pickup availability
Use this text to encourage communication or promote sharing on social networks.
Suit for variety of filaments, especially for PLA.
Double-sided printing, It is convenient, durable and practical.
Easy to clean, just wipe it off with a soft cloth before printing or alcohol after printing.
Easy to Install: The spring steel sheet is flat and flexible, just put on it and print.
It is a flexible steel platform .The coating is not easy to fall off and scratch. Can be gently bent thousands of times without being out of shape.
You only need to bend the sping steel plate with your hands, and the model can be easily demoulded without using other tools.
Size: 235*235mm for Creality K1, Ender 3 S1, Ender 5 S1 ,Ender3 S1 Pro, Ender3 V3 SE, Ender3 V3 KE
Size: 310*315mm for Creality K1 Max
PEI Sheet Build Plate Size | 3D Printers |
---|---|
235mmx235mm 9.25x9.25 inch |
Creality Ender 3/Ender 3 S1/ Ender 3 Pro/ Ender 3S/ Ender 3 v2/ CR 20/CR 20 Pro /Ender 5/Ender 5 Pro / Creality K1, Voxelab Aquila, Geeetech A10 series, Artillery Genius, BIQU-B1, FOKOOS Odin-5 F3 |
310x315mm | Creality K1 Max |
Excellent first-layer adhesion. It has very good adhesion,no need glue and lac.
Recommend:
H1H/PEY: PLA/TPU/PETG/ABS
PEI: PLA/TPU/PETG/ABS/PC/Nylon etc.
Suggest temperature for plate:
PLA 60-65 'C/PETG 70-80'C
ABS 90-100'C/TPU 30-40'C
How to maintain PEI build plate?
1.When you touch the surface of the H1H and modelyour fingerprint will make thepattern temporarily hidden.At this time, wipe it with lPA, or wipe it with a wet towel first,and then wipe it with a dry towel .The pattern will reappear.
2. Before printing, please wipe off fingerprintswith wet wipes and dry the build plate.
Strong magnetism
if the printing sheet become a little bent ,magnetic base will suck it to flat,so they need to use together.
If you have magnetic base already, you can buy only printing sheet.
About the adhesion of Build Plate:
1、Before printing, it is necessary to wipe the plate with a soft cloth to ensure that there is no dust on the bed to affect the adhesion of the print bed.
2、Before printing, it must be leveled, keep a distance of A4 paper thickness between the nozzle and the platform, so as to avoid the nozzle scratching the surface and avoiding the deformation of the bottom surface of the print model.
3. After our extensive testing, we recommend H1H/PEY/PEO/PET to print PLA and TPU and ABS and PETG. PEI print PLA /PETG / PC/ABS /TPU /Nylon etc.
About removing the prints on your build plates:
1、The hot bed temperature must drop to room temperature before removing the prints, otherwise it is easy to cause the printing film to tear and fall off.
2、 The small prints can be taken off directly by hand, the large prints need to bent spring steel plate by hand and removed without other tools.