BIQU CryoGrip Pro Glacier Panda Build Plate

for Snapmaker U1 

【Perfect Compatibility】BIQU CryoGrip Pro Glacier Build Plate is perfect suitable for Snapmaker U1 3D Printer, compatible with PLA(45-55℃), PETG(60-70℃), ABS(100℃）, PA and other filaments. (NOTE: Glacier printing adhesion not as good as Frostbite with PLA and PETG).

【Honeycomb Handle Design】The Glacier Build Plate adopts sleek honeycomb handle design, isolates heat from the print area. At a 100°C heat bed temperature, the temperature in the handle area remain slow enough to touch, enabling immediate print removal without cool down, saving your efficient time.

【Unparalleled Adhesion】CryoGrip Pro Glacier Build Plate has unparalleled first layer adhesion. The substrate has high magnetism, strong adsorption and fixation, so there is no need to worry about printing failure caused by the first layer falling off and enjoy perfect printing effect without warping, greatly improving the printing success rate.

【Easy to Removable and Clean】The printed model can be easily removes by bending the plate. If a print sticks too firmly, please place the plate in a freezer for 10 minutes to assist with removal. A simple wipe with water/soap/alcohol can easily restore its adhesion.

【Special Material Texture Printing】CryoGrip Pro Glacier Build Plate sandwiched with 7 layers of cobalt oxide coating, consisting of Base Plate, Base Coat, Intermediate Coating, and Top Coat. The build plate have Impact resistant, Corrosion Resistant, Long life span.zero risk of repeated bending causing coating to peel off. The surface texture is delicate, making the bottom of the printed part smoother.

Effortless Print Removal

CryoGrip Pro Series can easily removed by bending the plate. For larger or more complex printed materials, use a scraper to gently lift the edges and pry them out carefully. If a print sticks too firmly, place the plate in a freezer for 10 minutes to assist with removal.

Easy Cleaning Methods

CryoGrip Pro Glacier provides strong adhesion without the need for adhesives or frequent cleaning. If heavey dirt accumulates, clean the surface with water and soap, or alcohol. (NOTE: CryoGrip Pro Frostibite CAN'T use alcohol to clean the surface.)

【Unmatched Adhesion】 BIQU CryoGrip Pro Glacier Panda build plate highly surpass traditional PEI steel spring sheets as per prints adsorption with PLA and PETG filament. Its superior first-layer adhesion helps you to keep away from glue, edge warping and print falling off. We recommend a low temperature setting of 45-55℃ for PLA filament, and 60-75℃ for PETG.

• 【Filament Compatibility】The CryoGrip Pro Glacier spring steel sheet is an all-rounder plate for different filament exploration. It excels at printing PLA, PETG, ABS, PA and other engineering materials, and is compatible with all materials with nozzle temperatures below 300℃. It performs much better in printing adhesion with most engineering materials than PEI build plates, but not as excellently as CryoGrip Frostbite plate with PLA and PETG.

【Heat Insulation Handle】 The sleek honeycomb handle design of our Glacier Panda build plate insulate heat from the print area. The temperature in the handle area remains low enough to touch even the heat bed temperature is 100℃, enabling immediate print removal with no more wait for the plate to cool down. Keep your projects moving smoothly and no more burning fingers!

【Easy to Clean】 Use only water and soap, or alcohol to clean the build plate surface. With our self-recovering coating, a simple wipe will restore its adhesion, ensuring confident performance every time. BIQU Bambu-Lab build plates also enable easy prints removal. Slightly bend the surface of the build plate, then your prints will detaches cleanly, no need of any scraping or prying tools.