Bambu Lab 4-in-1 PTFE Adapter
Couldn't load pickup availability
Use this text to encourage communication or promote sharing on social networks.
Bambu Lab 3D printer Part 4-in-1 PTFE Adapter material pipe expansion port simultaneously connect 4 feeding modules X1/P1 series
Bambu Lab 3D printer accessory material pipe expansion port [for Bambu X1/P1 series universal]
The expansion port of the material pipe can simultaneously connect 4 feeding modules to the printer, and can expand to achieve printing of 7 consumables: 1 AMS (4 colors) and 3 other consumables. The expansion port of the material pipe can also allow the printer to connect AMS and filaments that are incompatible with AMS, such as TPU 95A, PET-CF, and other brands of carbon fiber glass fiber filaments.
| PTFE TUBE | Filament Source |
|---|---|
| 1 | The default spool holder available on the printer |
| 2 | AMS (Filament buffer or Filaments Hub for multi-color printing |
| 3 | Drying box 1 (TPU), for special material printing |
| 4 | Drying box 2 (PC), for special material printing |
Instructions for use
The Bambu 4-in-1 PTFE Adapter is designed with a clear direction of use, as shown in the figure below.
1. When using AMS:
Connect the PTFE tube from the tool head to the OUT end of the Bambu 4-in-1 PTFE Adapter.
- Connect the PTFE tube from the buffer output to one of its IN ends. - Directly insert a maximum of three filament wires into each hole of the Bambu 4-in-1 PTFE Adapter IN end.
2. When the AMS is not being used:
- Connect the PTFE tube from the tool head to the OUT end of the Bambu 4-in-1 PTFE Adapter.
- Directly insert a maximum of four filament wires into each hole of the Bambu 4-in-1 PTFE Adapter IN end.
It is important to note that reversing connections may cause filament blockage. Therefore, it is essential to ensure that the installation direction is correct.
