{"product_id":"for-qidi-box-plus4-upgrade-accessory-kits","title":"for QIDI BOX Plus4 Upgrade Accessory Kit","description":"\u003ch3 style=\"text-align: center;\"\u003eUpgrade Plus4 to Support the QIDI BOX\u003c\/h3\u003e\n\u003ch3\u003eRemove the residual filament\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/20260323175404_9583_5.png?v=1774259693\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cimg\u003eIf the filament has not been unioaded\u003c\/h3\u003e\n\u003cp\u003eSelect the extruder temperature of 240°Cin the control interface.\u003c\/p\u003e\n\u003cp\u003e(The specific temperature is selected according to the recommended temperature of the filaments remaining in the toolhead.)\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/2026-03-24T094109.079.jpg?v=1774316673\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eClick the UP botton and pull the filaments out of the toolhead.\u003c\/p\u003e\n\u003ch3\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/01_1.jpg?v=1774317782\" alt=\"\"\u003e\u003c\/h3\u003e\n\u003ch3\u003eif the filament has been unloaded\u003c\/h3\u003e\n\u003cp\u003eInsert the filament into the toolhead, and select the extruder temperature of 240°C in the control interface.\u003c\/p\u003e\n\u003cp\u003e(The specific temperature is selected according to the recommended temperature of the filaments remaining in the toolhead.)\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/01_2.jpg?v=1774318460\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eClick the DOWN button to extrude all the residual filament in the toolhead.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/7_2.jpg?v=1774319478\"\u003e\u003c\/p\u003e\n\u003cp\u003eClick the UP botton and pull the filaments out of the toolhead.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/20260324105536_9591_5_1.jpg?v=1774322082\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eII.Tum off the power\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/20260324105536_9591_5.jpg?v=1774322023\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eIII.Remove the front cover of the toolhead.\u003c\/p\u003e\n\u003cp\u003eThere is a snap structure at the top ofthe front cover, so please don't take it out directly. Move up to unlock the front cover first, and then take it outwards.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/20260324105536_9591_5_3.jpg?v=1774322404\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eIV.Disconnect the cables of the hotend and the Hall element\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/20260324105536_9591_5_2.jpg?v=1774322274\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eV.Remove the screws of extruder, and then remove the old extruder.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/20260324105536_9591_5_2.jpg?v=1774322274\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eVI. Take the new extruder out of the PLUS4 Upgraded Multi-Color Accessory Kit, install it back in place, and fix it with Screws.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/20260324102509_9586_5_2.jpg?v=1774320219\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eVII. Connect the cables of the hotend and the Hall element.\u003c\/p\u003e\n\u003ch3\u003eNote: Ensure the hotend cable clip is facing downward when connecting.\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/2_3.jpg?v=1774324666\"\u003e\u003c\/p\u003e\n\u003cp\u003eVIII.install the front cover of toolhead.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/1_13.jpg?v=1774332590\"\u003e\u003c\/p\u003e\n\u003cp\u003e IX. Peel off the adhesive backing from the lever sticker and stick it on the head of the lever.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/2_5.jpg?v=1774324739\"\u003e\u003c\/p\u003e\n\u003cp\u003eX.Peel off the adhesive backing from the push plate silicone, then fix it onto the push plate in the direction shown in the diagram.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/2_4_2.jpg?v=1774333137\"\u003e\u003c\/p\u003e\n\u003cp\u003eXI. Peel off the adhesive backing of the sticker for wiping and paste it smoothly onto the inner surface of the groove.\u003c\/p\u003e\n\u003cp\u003e \u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/1_12.jpg?v=1774324473\"\u003e\u003c\/p\u003e\n\u003cp\u003eXIl. Remove the fixing screws of the USB interface.Connect the USB adapter board to the USB interface.Fix it with the mounting bolts of the USB adapter board.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/20260324105536_9591_5_1.jpg?v=1774322082\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eXIII.You may now tum on the power. Theinstallation of the PLUS4 Upgraded Multi-color Accessory has been successfully completed.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/20260324174605_9600_5.png?v=1774345748\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eX-Plus4 connection method (single box connection)\u003c\/h3\u003e\n\u003cp\u003eThis page provides the connection method for a single QIDI BOX on X-Plus4\u003c\/p\u003e\n\u003ch3\u003eWhen wiring, it is recommended to power off the QIDI BOX and printer before proceeding with the operation.\u003c\/h3\u003e\n\u003cp\u003eChange USB port.\u003c\/p\u003e\n\u003cp\u003eInstall BOX Hub on the X-Plus4 backplane.\u003c\/p\u003e\n\u003cp\u003eConnect QIDI BOX signal line.\u003c\/p\u003e\n\u003cp\u003eConnect the BOX Hub signal line.\u003c\/p\u003e\n\u003cp\u003eConnect the power cord.\u003c\/p\u003e\n\u003cp\u003ePower on after confirming the correct connection.\u003c\/p\u003e\n\u003cp\u003eWhen printing with PLA or PETG, we recommend placing the QIDI BOX beside the printer and keeping the printer’s top cover open for proper ventilation.\u003c\/p\u003e\n\u003cp\u003eIf the enclosure remains closed, the internal chamber temperature may become too high, potentially softening the filament and causing printing issues such as feeding problems or poor extrusion.\u003c\/p\u003e\n\u003ch3\u003eNotice:\u003c\/h3\u003e\n\u003cp\u003eThe Plus4 BOX hub data cable is different from the Q2 BOX \/ MAX4 BOX data cable.\u003cbr\u003eDo not mix or interchange them.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"1063\" height=\"598\" src=\"https:\/\/www.youtube.com\/embed\/n36qmQkQH8g\" title=\"How to install the Plus4 multi-color upgraded kit?\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003carticle class=\"4ever-article\"\u003e\u003cspan data-type=\"text\"\u003e\u003c\/span\u003e\u003c\/article\u003e\n\u003carticle class=\"4ever-article\"\u003e\u003cspan data-type=\"text\"\u003e\u003c\/span\u003e\u003c\/article\u003e\n\u003carticle class=\"4ever-article\"\u003e\u003cspan data-type=\"text\"\u003e\u003c\/span\u003e\u003c\/article\u003e","brand":"QIDI","offers":[{"title":"Default Title","offer_id":52043557044537,"sku":"PR00680","price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/forQIDI_Plus4_Upgrade_Accessory.png?v=1774334328","url":"https:\/\/p3d.mx\/products\/for-qidi-box-plus4-upgrade-accessory-kits","provider":"P3D","version":"1.0","type":"link"}