{"product_id":"touch-screen-for-bambu-lab-a1-a2l","title":"Touch Screen for Bambu Lab-A1\/A2L","description":"\u003cp\u003eWide Compatibility: Designed for various 3D printer models, suitable for equipment upgrades, replacement parts and maintenance applications in home, workshop and professional printing environments.\u003c\/p\u003e\n\u003cp\u003eDurable Material Structure: Made with reliable materials and precision manufacturing, featuring stable construction, accurate dimensions and convenient installation for long-term use.\u003c\/p\u003e\n\u003cp\u003eStable Printing Performance: Helps improve printer operation stability with consistent performance, smooth operation and reliable support for daily 3D printing tasks.\u003c\/p\u003e\n\u003cp\u003eMultiple Application Scenarios: Suitable for 3D printing upgrades, repairs and customization projects, providing a practical solution for makers, engineers and printing enthusiasts.\u003c\/p\u003e\n\u003cp\u003eResponsive Touch Interface - The sensitive touch panel enables intuitive navigation through printer menus, print file selection, and parameter adjustments, providing a smooth and efficient user interaction experience.\u003c\/p\u003e\n\u003cp\u003eStraightforward Installation Process - Engineered as a direct drop-in replacement part, it allows users to complete the swap quickly using basic tools, restoring full control functionality without complex procedures.\u003c\/p\u003e\n\u003cp\u003e3.5-inch IPS capacitive touchscreen which connects to the Mainboard which is used to control the printer through the touchscreen interface.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eA1\/A2L\u003c\/p\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cp\u003eTouch Screen *1\u003c\/p\u003e\n\u003ch3\u003eScreen Replacement Guide - A1\u003c\/h3\u003e\n\u003cp\u003eThis guide shows how to replace the Screen on the A1\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIn this guide we will show the process of replacing the Screen on the A1\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/a1\/manual\/replace-touchscreen\/a1_touchscreen.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWhen to use?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThis guide should be used if the Screen of the A1 is faulty, and needs to be replaced.\u003cbr\u003e\u003cbr\u003eCommon issues that are caused by the A1 Screen are:\u003cbr\u003e\u003cbr\u003eScreen is not detecting any interaction\u003cbr\u003e\u003cbr\u003eThe screen is not turning on\u003cbr\u003e\u003cbr\u003eRecommended by Bambu Lab Customer Support\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eTools and materials needed\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eH2.0 Allen key\u003c\/p\u003e\n\u003cp\u003eH1.5 Allen key\u003c\/p\u003e\n\u003cp\u003eFlat end screwdriver or prying tool\u003c\/p\u003e\n\u003cp\u003eSharp pliers\u003c\/p\u003e\n\u003cp\u003e20-30 minutes\u003c\/p\u003e\n\u003ch3\u003eSafety Warning\u003c\/h3\u003e\n\u003ch3\u003eIMPORTANT!\u003c\/h3\u003e\n\u003cp\u003eIt's crucial to power off the printer before performing any maintenance work on the printer and its electronics, including tool head wires, because leaving the printer on while conducting such tasks can cause a short circuit, which can lead to additional electronic damage and safety hazards.\u003c\/p\u003e\n\u003cp\u003eWhen you perform maintenane or troubleshooting on the printer, you may be required to disassemble some parts, including the hotend. This process can expose wires and electrical components that could potentially short circuit if they come into contact with each other or with other metal or electronic components while the printer is still on. This can damage the electronics of the printer and cause further damage.\u003c\/p\u003e\n\u003cp\u003eTherefore, it's essential to switch off the printer and disconnect it from the power source before doing any maintenance work. This will prevent any short circuits or damage to the printer's electronics. By doing so, you can avoid potential damage to the printer's electronic components and ensure that the maintenance work is performed safely and effectively.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eSteps to remove the old screen\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e1. Place the printer on its front\u003cbr\u003e\u003cbr\u003eFor easy access to the bottom section of the A1, you need to place the printer on the front.\u003cbr\u003e\u003cbr\u003eStart by flipping the screen on its side, then gently place the printer on its front, as shown in the image below.\u003cbr\u003e\u003cbr\u003eUse a box of filament to keep the top side raised to avoid putting pressure on the extruder and the screen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/a1\/maintenance\/power-supply\/place_the_a1_printer_on_its_front.jpeg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e2. Disconnect the wires and remove the wire bracket\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e1.Disconnect the cables of the camera, X-axis motor, and Z-axis motor;\u003cbr\u003e\u003cbr\u003e2.Loosen 1 screw;\u003cbr\u003e\u003cbr\u003e3.Push the cable bracket upwards, disconnect the USB data cable, and remove the cable bracket.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-09-03_142125_494.png?v=1788416618\" alt=\"\"\u003e\u003c\/span\u003e\u003cspan\u003e3. Remove the printer's bottom cover\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eRemove the 10 screws marked in red to remove the bottom cover.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/a1\/maintenance\/wifi-antenna\/%E6%8B%86%E5%BA%95%E5%A3%B3%E8%9E%BA%E4%B8%9D10.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e4. Disconnect the Screen ribbon cable\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eCarefully raise the black plastic clip from the Mainboard to release the ribbon cable of the screen.\u003cbr\u003e\u003cbr\u003eWhen released, you can easily remove it from the board.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/a1\/manual\/replace-touchscreen\/remove_the_ribbon_cable.jpeg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e5. Remove the Screen clip\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eAs shown in the image, remove the two screws holding the screen metallic clip in place.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/a1\/manual\/replace-touchscreen\/remove_the_touchscreen_clip_screws.jpeg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNext, grab the metallic clip with a pair of sharp pliers and pull it towards you. There will be some slight resistance, so pull it out carefully to avoid damaging the mainboard.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/a1\/manual\/replace-touchscreen\/remove_the_metallic_clip.jpeg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e6. Remove the Screen from the printer\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eWith the clip removed, you can now completely remove the screen from the printer. \u003c\/p\u003e\n\u003cp\u003ePlease take note of the angle shown in the picture. The screen has plastic tabs in its holder, and can only be removed when the plastic tabs are aligned.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/a1\/manual\/replace-touchscreen\/remove_the_a1_touchscreen.jpeg\"\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eInstall the new Screen\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan\u003e1. Attach the Screen to the printer\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eCarefully slide the screen through the hole, half way. This will make the next steps easier.\u003cbr\u003e\u003cbr\u003ePlease take note of the angle shown in the picture. The screen has plastic tabs in its holder, and can only be inserted when the plastic tabs are aligned.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/a1\/manual\/replace-touchscreen\/install_the_new_a1_touch_screen.jpeg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e2. Install the metallic bracket\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eCarefully align the metallic bracket as shown in the image, while making sure that the ribbon cable is pulled to the side of the printer as shown in the image.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/a1\/manual\/replace-touchscreen\/attach_the_metallic_bracket.jpeg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e3. Attach the Screen ribbon cable\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eGently push the ribbon cable in the motherboard connector, then lock the black plastic clip in place to secure it.\u003cbr\u003e\u003cbr\u003eEnsure that the white line on the ribbon cable is aligned, as shown in the image below.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/a1\/manual\/replace-touchscreen\/attach_the_ribbon_cable.jpeg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e4. Install the the printer's bottom cover\u003c\/h3\u003e\n\u003cp\u003eYou can now proceed with installing the bottom cover back to the printer.\u003c\/p\u003e\n\u003cp\u003ePay close attention to the motor wire in the top left side marked with the red arrow in the image below. Avoid pressing the cover in place before the wire is correctly managed.\u003c\/p\u003e\n\u003cp\u003eThe cover will clip in place, then you can proceed with installing the 10 screws while ensuring you do not over-tighten them.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/a1\/maintenance\/wifi-antenna\/%E5%AE%89%E8%A3%85%E5%BA%95%E7%9B%96.jpg\"\u003e\u003c\/p\u003e\n\u003ch3\u003e5. Install the wire bracket and connect the wires\u003c\/h3\u003e\n\u003cp\u003eIn the final step, carefully align the wire bracket then push it downwards while making sure the USB cable is fully pushed against the printer frame.\u003c\/p\u003e\n\u003cp\u003eThen, tighten the screw shown in the image to lock it in place. Avoid overtightening the screw as this is screwed into the plastic frame.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/a1\/maintenance\/wifi-antenna\/%E5%AE%89%E8%A3%85%E6%94%AF%E6%9E%B6.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003eNext, re-connect the Camera, X-axis motor and Z-axis motor cables to finish the installation.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/a1\/maintenance\/wifi-antenna\/%E6%8E%A5%E7%BA%BF%E7%BC%86.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003eNote: The shorter cable on the right is the X-axis motor cable, which connects to the upper right connector; The longer cable on the right is the Z-axis motor cable, which connects to the lower right connector.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eVerify the functionality\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eTo ensure everything works as expected, turn on the printer and interact with the screen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf the screen touch is detected, this confirms the installation was correct.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePotential problems and solutions\u003c\/h3\u003e\n\u003cp\u003eIf you encounter problems during the installation of a new Screen, please check the potential problems and solutions listed below:\u003c\/p\u003e\n\u003ch3\u003eThe Camera is not working\u003c\/h3\u003e\n\u003cp\u003eConfirm the camera wire is fully installed as shown in Step 5. Install the wire bracket and connect the wires\u003c\/p\u003e\n\u003ch3\u003eThe X-axis \/ Z-axis is not working\u003c\/h3\u003e\n\u003cp\u003eConfirm the X motor and Z motor wires are fully installed as shown in Step 5. Install the wire bracket and connect the wires\u003c\/p\u003e\n\u003ch3\u003eThe screen displays an error message\u003c\/h3\u003e\n\u003cp\u003eThe USB cable might not be fully inserted. Loosen the screw holding the wire bracket in place, then re-connect the USB cable as shown in Step 5. Install the wire bracket and connect the wires\u003c\/p\u003e\n\u003ch3\u003eScreen not turning on \/ touch not detected\u003c\/h3\u003e\n\u003cp\u003eConfirm the ribbon cable is correctly installed, as shown in Step 3. Attach the Screen ribbon cable\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"A1\/A2L","offer_id":54421442363705,"sku":null,"price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/Touch_Screen_-A1_A2L.jpg?v=1788419859","url":"https:\/\/p3d.mx\/es\/products\/touch-screen-for-bambu-lab-a1-a2l","provider":"P3D","version":"1.0","type":"link"}