{"product_id":"toolhead-front-carriage-for-bambu-x1-p1-series","title":"Toolhead Front Carriage for Bambu-X1\/P1 Series","description":"\u003cp\u003eDirect fit for Bambu Lab X1 \/ P1 series 3D printers. Aligns perfectly with original mounting holes for seamless replacement.\u003c\/p\u003e\n\u003cp\u003eFirmly Secures Extruder Assembly Holds the extruder and filament cutter arm tightly to avoid loose parts even during high-speed printing, keeping your printer running stably.\u003c\/p\u003e\n\u003cp\u003eHigh Heat-Resistant Engineering Plastic Constructed from robust heat-resistant plastic, it withstands continuous printing heat without deformation for long-term service life.\u003c\/p\u003e\n\u003cp\u003eReliable Internal Protection Shields the toolhead’s wiring, motor and sensors against dust, debris and accidental bumps to reduce component failure.\u003c\/p\u003e\n\u003cp\u003eTool-Free Quick Installation Precise cutouts and magnetic positioning support fast assembly and maintenance, no extra tools required.\u003c\/p\u003e\n\u003ch3\u003eReplace the Extruder Motor\u003c\/h3\u003e\n\u003cp\u003eThis guide shows how to remove and install the extruder motor\u003c\/p\u003e\n\u003ch3\u003eExtruder Motor\u003c\/h3\u003e\n\u003cp\u003eThe extruder motor, installed on the tool head, drives the extruder movement. It's a 36-series circular stepper motor.Extruder Motor\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/x1\/maintenance\/replace-the-e-motor\/extrude_motor.jpg\"\u003e\u003c\/p\u003e\n\u003ch3\u003eSafety Warning\u003cbr\u003eIMPORTANT!\u003c\/h3\u003e\n\u003cp\u003eIt's crucial to power off the printer before conducting any maintenance work, including work on the printer's electronics and tool head wires. Performing tasks with the printer on can result in a short circuit, leading to electronic damage and safety hazards.\u003c\/p\u003e\n\u003cp\u003eDuring maintenance or troubleshooting, you may need to disassemble parts, including the hotend. This exposes wires and electrical components that could short circuit if they contact each other, other metal, or electronic components while the printer is still on. This can result in damage to the printer's electronics and additional issues.\u003c\/p\u003e\n\u003cp\u003eTherefore, it's crucial to turn off the printer and disconnect it from the power source before conducting any maintenance. This prevents short circuits or damage to the printer's electronics, ensuring safe and effective maintenance.\u003c\/p\u003e\n\u003ch3\u003eOperational guide\u003c\/h3\u003e\n\u003ch3\u003eStep 1 - Remove the TH board assembly\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-09-01_161829_667.png?v=1788250772\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 2 - Remove the LOGO LED cable\u003c\/h3\u003e\n\u003cp\u003eRemove the LOGO LED cable.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-09-01_162014_793.png?v=1788250845\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 3 - Remove the bambu micro lidar\u003c\/h3\u003e\n\u003cp\u003eRemove 2 screws with an H1.5 hex key and remove the micro lidar assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-09-01_162329_093.png?v=1788251045\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 4 - Remove 8 screws\u003c\/h3\u003e\n\u003cp\u003eRemove 8 screws with an H2.0 hex key in sequence.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/x1\/maintenance\/replace-the-e-motor\/remove_8_screws.jpg\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 5 - Remove the Toolhead Front Carriage assembly of the toolhead slider\u003c\/h3\u003e\n\u003cp\u003eRemove the toolhead front carriage assembly  (with the extruder) of the toolhead.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-09-01_162626_539.png?v=1788251217\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eNote: There are four springs attached to the back cover of the tool head slider at the upper position of the copper sleeve to prevent it from falling off.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/x1\/maintenance\/replace-the-e-motor\/springs_inside.jpg\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 6 - Remove the extruder\u003c\/h3\u003e\n\u003cp\u003eRemove the 3 screws with an H2.0 hex key, and remove the extruder and the hot end.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-09-01_162804_069.png?v=1788251305\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 7 - Remove the extruder motor\u003c\/h3\u003e\n\u003cp\u003eRemove 2 screws with an H2.0 hex key and remove the extruder motor.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-09-01_163026_801.png?v=1788251690\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eStep 8 - Install the extruder motor\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eInstall the new extruder motor onto the toolhead front carriage of the slider, ensuring that the motor cable is positioned on top. Then, secure the motor in place by tightening 2 screws.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-09-01_163512_511.png?v=1788251806\" alt=\"\"\u003e\u003c\/span\u003e\u003cspan\u003eStep 9 - Install the extruder\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eInstall the extruder and the hot end together on the toolhead front carriage of the slider, and then secure it with 3 screws.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/x1\/maintenance\/replace-the-e-motor\/install_the_extruder.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eStep 10 - Install the toolhead front carriage assembly of the toolhead\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eBefore installation, ensure that the springs are correctly positioned and that both copper sleeves are inserted into the corresponding grooves on the back cover of the slider. Then, carefully install the toolhead front carriage assembly of the slider, being cautious not to press against the motor cable.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-09-01_165453_395.png?v=1788252912\" alt=\"\"\u003e\u003c\/span\u003e\u003cspan\u003eStep 11- Lock screws (4+4)\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eLock the screws to secure the toolhead front carriage assembly of the slider. Please tighten the screws in the order of 1~8 as shown in the figure below.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-09-01_165835_679.png?v=1788253137\" alt=\"\"\u003e\u003c\/span\u003e\u003cspan\u003eStep 12 - Install the bambu micro lidar\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eInstall the bambu micro lidar under the toolhead and secure it with 2 screws.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-09-01_170039_911.png?v=1788253261\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eStep 13 - Install the LOGO LED cable\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eInstall the LOGO LED cable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-09-01_170205_910.png?v=1788253346\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 14 - Install the TH board assembly, assemble the toolhead\u003c\/h3\u003e\n\u003ch3\u003eTo verify completion\/success\u003c\/h3\u003e\n\u003cp\u003ePower ON the printer.\u003c\/p\u003e\n\u003cp\u003eClick on the extruder button on the screen to verify that the motor can drive the extruder as expected.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/x1\/maintenance\/replace-the-e-motor\/press_to_check_the_motor.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003eRun a self-test and ensure that there are no error messages associated with the toolhead.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/x1\/maintenance\/replace-th-board-assembly\/self_test.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"X1 Series and P1 Series","offer_id":54412118950201,"sku":null,"price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/Toolhead_Front_Carriage_for_Bambu-X1P1_Series.jpg?v=1788254115","url":"https:\/\/p3d.mx\/es\/products\/toolhead-front-carriage-for-bambu-x1-p1-series","provider":"P3D","version":"1.0","type":"link"}