{"product_id":"replacement-filament-cutter-p2s-for-bambu-lab","title":"Filament Cutter \/ Lever for Bambu- P2S","description":"\u003ch3 style=\"text-align: center;\"\u003eFilament Cutter\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/3pcs_Filament_Cutter_for_Bambu_P2S.jpg?v=1779073064\" alt=\"for Bambu Filament Cutter\"\u003e\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eCutter Lever\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/6pcs_Filament_Cutter_for_Bambu_P2S_47f099e5-d81f-4094-a3c9-2853927c45bf.jpg?v=1779073104\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe filament can be cut to prevent the supplies from clogging. When used with AMS, it assists with multi-material switching.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eP2S\u003c\/p\u003e\n\u003ch3\u003eFilament Cutter Lever Replacement Guide for the P2S\u003c\/h3\u003e\n\u003cp\u003eThis page introduces how to replace P2S Filament Cutter Lever\u003c\/p\u003e\n\u003ch3\u003eFilament Cutter and Filament Cutter Lever\u003c\/h3\u003e\n\u003cp\u003eThe filament cutter lever is a lever or handle on the toolhead with a blade mounted to it which is used to cut the loaded filament just above the hotend in order to retract old filament and feed in new filament.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/Filament_Cutter_-_P2S_1f39beb7-67ef-4d36-be2a-21a7779e7454.png?v=1771057752\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhen to Use This Guide\u003c\/h3\u003e\n\u003cp\u003eThe cutter lever itself is physically damaged\u003c\/p\u003e\n\u003ch3\u003eRequired Tools and Materials\u003c\/h3\u003e\n\u003cp\u003eFilament cutter lever\u003c\/p\u003e\n\u003cp\u003eH2.0 Allen key\u003c\/p\u003e\n\u003cp\u003eTweezers\u003c\/p\u003e\n\u003ch3\u003eSafety Warning\u003cbr\u003eIMPORTANT!\u003c\/h3\u003e\n\u003cp\u003eAlways power off and disconnect power on the printer before performing maintenance work. Not doing so means there is a risk of electric shock, short circuit, and damage to the printer or surrounding area.\u003c\/p\u003e\n\u003cp\u003eWhen a maintenance task necessitates the printer being powered on, use insulated gloves for safety and pay special care not to pinch, damage, or put pressure on any exposed wires, connectors, or circuit boards. Additionally, the nozzle can be extremely hot so never touch it with exposed skin.\u003c\/p\u003e\n\u003ch3\u003eCaution!\u003c\/h3\u003e\n\u003cp\u003eThe blade attached to the filament cutter lever is very sharp. Pay attention to its position and be careful not to touch it while handling the lever.\u003c\/p\u003e\n\u003ch3\u003eRemoving the Cutter Lever\u003c\/h3\u003e\n\u003cp\u003eStep 1: Open the Toolhead Front Cover\u003c\/p\u003e\n\u003cp\u003eOpen the toolhead cover by pinching it from the sides near the bottom and pulling. Place the filament cover on top of the toolhead and out of the way, being careful not to pull on the wires still attached.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/p2s\/maintenance\/hotend-and-silicone-sock\/open_front_cover_001.png\" alt=\"open_front_cover_001.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 2: Release the Cutter Lever\u003c\/h3\u003e\n\u003cp\u003eSlightly depress the filament cutter lever with one hand wile unscrewing the locking screw with the H2.0 Allen key.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/p2s\/maintenance\/replace_cutter_lever\/cutter_lever_screw_001.png\" alt=\"cutter_lever_screw_001.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eOnce the screw is loosened enough, rotate the filament cutter away from the toolhead completely.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/p2s\/maintenance\/replace_cutter_lever\/release_cutter_002_.png\" alt=\"release_cutter_002_.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 3: Remove the Cutter Blade\u003c\/h3\u003e\n\u003cp\u003eRemove the cutter from the lever with tweezers, being very careful not to touch the sharp cutter blade. The cutter should be moved to the left so its pins slide out the open side of their slots to release it.\u003c\/p\u003e\n\u003ch3\u003eStep 4: Remove the Cutter Lever\u003c\/h3\u003e\n\u003cp\u003eThe circular locking clip can suddenly pop out during removal, so be prepared for the clip's release.\u003c\/p\u003e\n\u003cp\u003eUse a tool to carefully push the circular locking clip off of the filament lever pin. Be sure to have a firm grip on the clip with either your hand or the tweezers and pull it the rest of the way off.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/p2s\/maintenance\/replace_cutter_lever\/remove_e_type_clip_006.png\" alt=\"remove_e_type_clip_006.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eRemove the washer and pull the filament cutter lever off of its pin. Remove or otherwise keep track of the radial spring which remains on the filament lever pin.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/p2s\/maintenance\/replace_cutter_lever\/remove_cutter_lever_007.png\" alt=\"remove_cutter_lever_007.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eInstalling the Cutter Lever\u003c\/h3\u003e\n\u003ch3\u003eStep 1: Install the Cutter Lever and Clip\u003c\/h3\u003e\n\u003cp\u003ePlace the radial spring onto the filament cutter pin in the orientation shown in the first panel of the below image. Place the replacement cutter lever over the pin, then the washer, then replace the clip over the pin to hold everything in place.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/p2s\/maintenance\/replace_cutter_lever\/install_lever_008.png\" alt=\"install_lever_008.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 2: Install the Cutter Blade\u003c\/h3\u003e\n\u003cp\u003eHolding the cutter lever with one hand, place the cutter blade in place with a pair of tweezers by placing its pins into the open end of the slots on the lever.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/p2s\/maintenance\/replace_cutter_lever\/cutter_005.png\" alt=\"cutter_005.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eRotate the filament cutter lever (with its locking screw loosened and out of the way) up into place, ensuring the cutter blade is inserted into its slot.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/p2s\/maintenance\/replace_cutter_lever\/cutter_slides_in_place_004.png\" alt=\"cutter_slides_in_place_004.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eTighten the screw on the cutter lever with the H2.0 Allen key.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/p2s\/maintenance\/replace_cutter_lever\/cutter_lever_screw_001.png\" alt=\"cutter_lever_screw_001.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 3: Close the Toolhead Front Cover\u003c\/h3\u003e\n\u003cp\u003ePlace the toolhead front cover back onto the toolhead, allowing its magnets to pull it into its correct position.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/p2s\/maintenance\/hotend-and-silicone-sock\/close_front_cover_002.png\" alt=\"close_front_cover_002.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eVerifying Functionality\u003c\/h3\u003e\n\u003cp\u003eEnsure that the filament cutter lever can be fully depressed toward the filament path and releases fully on its own.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"3pcs Filament Cutter","offer_id":53302589358393,"sku":"PR00697","price":9.99,"currency_code":"USD","in_stock":true},{"title":"6pcs Filament Cutter","offer_id":53302591586617,"sku":"PR00697*2","price":12.0,"currency_code":"USD","in_stock":true},{"title":"1 pcs Cutter Lever","offer_id":53302589391161,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/Filament_Cutter_-_P2S_for_3pcs.jpg?v=1779072804","url":"https:\/\/p3d.mx\/es\/products\/replacement-filament-cutter-p2s-for-bambu-lab","provider":"P3D","version":"1.0","type":"link"}