{"product_id":"for-bambu-lab-chamber-temperature-sensor-p2s","title":"for Bambu Lab Chamber Temperature Sensor - P2S","description":"\u003cp\u003eThe chamber temperature sensor is an NTC with a fixed bracket, installed on the inside of the printer's front beam, and is used to detect the temperature inside the printer chamber.\u003c\/p\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cp\u003e- Cavity temperature sensor*1\u003c\/p\u003e\n\u003cp\u003e- BT3x6 screws*2\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eP2 Series\u003c\/p\u003e\n\u003ch3\u003eChamber Temperature Sensor Replacement Guide for the P2S\u003c\/h3\u003e\n\u003cp\u003eThis wiki shows how to replace the chamber temperature sensor of P2S\u003c\/p\u003e\n\u003ch3\u003eChamber Temperature Sensor\u003c\/h3\u003e\n\u003cp\u003eThe chamber temperature sensor is an NTC with a fixed bracket, installed on the inside of the printer’s front beam, and is used to detect the temperature inside the printer chamber.\u003c\/p\u003e\n\u003ch3\u003eAccessory package includes:\u003c\/h3\u003e\n\u003cp\u003eChamber temperature sensor* 1\u003c\/p\u003e\n\u003cp\u003eBT3x6 screw* 2\u003c\/p\u003e\n\u003ch3\u003eWhen to Use This Guide\u003c\/h3\u003e\n\u003cp\u003e1.The chamber temperature sensor connection cable is damaged.\u003c\/p\u003e\n\u003cp\u003e2.Chamber temperature error.\u003c\/p\u003e\n\u003ch3\u003eRequired Tools and Materials\u003c\/h3\u003e\n\u003cp\u003e1. New chamber temperature sensor\u003c\/p\u003e\n\u003cp\u003e2. H2.0 Hex wrench\u003c\/p\u003e\n\u003ch3\u003eSafety Warning\u003cbr\u003eIMPORTANT!\u003c\/h3\u003e\n\u003cp\u003eAlways power off and disconnect power on the printer before performing maintenance work. Not doing so means there is a risk of electric shock, short circuit, and damage to the printer or surrounding area.\u003c\/p\u003e\n\u003cp\u003eWhen a maintenance task necessitates the printer being powered on, use insulated gloves for safety and pay special care not to pinch, damage, or put pressure on any exposed wires, connectors, or circuit boards. Additionally, the nozzle can be extremely hot so never touch it with exposed skin.\u003c\/p\u003e\n\u003ch3\u003eRemove the Chamber Temperature Sensor\u003c\/h3\u003e\n\u003ch3\u003eStep 1: Disconnect the Cables\u003c\/h3\u003e\n\u003cp\u003eOpen the access end of the AP board cover, then disconnect the chamber temperature sensor cable from the AP board.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/360_20260224114217.png?v=1771904571\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 2: Remove the Chamber Temperature Sensor\u003c\/h3\u003e\n\u003cp\u003eLocate the chamber temperature sensor inside the front cross beam. Remove the two screws (BT3x6) with an H2.0 Allen key, then remove the sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/360_20260224114409.png?v=1771904687\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eInstall the Chamber Temperature Sensor\u003c\/h3\u003e\n\u003ch3\u003eStep 1: Install the Chamber Temperature Sensor\u003c\/h3\u003e\n\u003cp\u003eAlign the new chamber temperature sensor with the screw holes on the printer beam, and tighten the two fixing screws (BT3x6) using an H2.0 Allen key.\u003c\/p\u003e\n\u003cp\u003ePlease hold the chamber temperature sensor in place while tightening the first screw, then tighten both screws together.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/360_20260224114608.png?v=1771904792\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"05_005.png\" src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/p2s\/maintenance\/replace-chamber-temperature-sensor\/05_005.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 2: Connect the Cables\u003c\/h3\u003e\n\u003cp\u003eRoute the chamber temperature sensor cable along the cross beam to the side of the AP board, connect it to the AP board, and refasten the inspection end of the AP board cover.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/0_a8a39f82-7063-4f0f-b9e6-5da449758f8a.png?v=1771904896\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"01_open_the_service_end_of_the_ap_board_cover_001.png\" src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/p2s\/maintenance\/replace-led-light-front\/01_open_the_service_end_of_the_ap_board_cover_001.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eVerifying Functionality\u003c\/h3\u003e\n\u003cp\u003eConnect the power supply and turn on the printer, then check whether the chamber temperature is normal.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"P2S","offer_id":51938788344121,"sku":"PR00719","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/for_Bambu_Lab_Chamber_Temperature_Sensor_464fc269-58fd-4533-a7c1-59a8cb8cad5a.png?v=1771062877","url":"https:\/\/p3d.mx\/es\/products\/for-bambu-lab-chamber-temperature-sensor-p2s","provider":"P3D","version":"1.0","type":"link"}