{"product_id":"for-bambu-bus-cable-4-pin-rotary-attachment-support-module-accessory-kit","title":"for Bambu Bus Cable 4-pin \/Rotary Attachment Support Module\/Accessory Kit","description":"\u003ch3 style=\"text-align: center;\"\u003eBus Cable 4-pin\u003c\/h3\u003e\n\u003cp\u003eThe Bambu Bus Cable 4-pin connects the Bambu Lab Rotary Attachment to the printer—plug the L-shaped end into the Rotary Attachment's 4-pin port and the other end into the printer's internal 4-pin port.\u003c\/p\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cp\u003e- Bambu Bus Cable 4-pin * 1 pc\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eBambu Lab Rotary Attachment\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/Bambu_Bus_Cable_4-pin.png?v=1773644515\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eRotary Attachment Support Module\u003c\/h3\u003e\n\u003cp\u003eCompatible with the Bambu Lab Rotary Attachment, this Support Module provides additional support during processing—especially when the end of the workpiece is prone to dropping, ensuring greater stability and precision.\u003c\/p\u003e\n\u003ch3\u003e In the Box\u003c\/h3\u003e\n\u003cp\u003e- Support Module * 1 pc\u003c\/p\u003e\n\u003ch3\u003e Compatibility\u003c\/h3\u003e\n\u003cp\u003eBambu Lab Rotary Attachment\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/Rotary_Attachment_Support_Module.png?v=1773644712\"\u003e\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eRotary Attachment Accessory Kit\u003c\/h3\u003e\n\u003cp\u003eThe Rotary Attachment Accessory Kit includes an adjustable Claw for securely holding workpieces, a Tape Measure for precise measurement, and a Spirit Level to ensure proper centering and alignment by adjusting the angle if the bubble is off-center.\u003c\/p\u003e\n\u003ch3 style=\"text-align: left;\"\u003eIn the Box\u003c\/h3\u003e\n\u003cp\u003e- Claw * 6 pcs\u003c\/p\u003e\n\u003cp\u003e- Tape Measure * 1 pc\u003c\/p\u003e\n\u003cp\u003e- Spirit Level * 1 pc\u003c\/p\u003e\n\u003ch3\u003e Compatibility\u003c\/h3\u003e\n\u003cp\u003eBambu Lab Rotary Attachment\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/Rotary_Attachment_Accessory_Kit.png?v=1773644886\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eH2 Series Rotary Attachment Processing Guide\u003c\/h3\u003e\n\u003cp\u003eThis article introduces how to use the laser rotary attachment processing function.\u003c\/p\u003e\n\u003ch3\u003eIntroduction to Laser Rotary Attachment Processing\u003c\/h3\u003e\n\u003cp\u003eLaser rotary processing is an advanced feature of the H2 series printers, which requires the rotary attachment for operation. Leveraging a high-precision laser module, a laser height probe and the rotary attachment, this function enables pattern processing on the surface of rotating objects. It is commonly applied to laser engraving of various rotary and annular objects such as cans and thermal mugs.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/20260127-121620.jpg\" alt=\"20260127-121620.jpg\"\u003e\u003c\/p\u003e\n\u003ch3\u003eMaterial Requirements for Laser Rotary Attachment Processing \u0026amp; Engraving\u003c\/h3\u003e\n\u003cp\u003eBefore processing an object, ensure that its shape and material meet the following requirements.\u003c\/p\u003e\n\u003ch3\u003eSurface Characteristics\u003c\/h3\u003e\n\u003cp\u003eA smooth curved surface without abrupt undulations (maximum allowable height difference: 15 mm).\u003c\/p\u003e\n\u003cp\u003eThe angle between the object axis and its central axis must be less than 40 degrees.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image-53.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eGeometric Limitations\u003c\/h3\u003e\n\u003cp\u003eThe material must be free of abrupt height changes (e.g., stepped objects with a step height exceeding 3 mm).\u003c\/p\u003e\n\u003cp\u003eSharp corners and internal beveled areas are difficult to process.\u003c\/p\u003e\n\u003ch3\u003eMaterial Limitations\u003c\/h3\u003e\n\u003cp\u003eTransparent materials (e.g., ordinary glass, clear acrylic, etc.) and mirror-finish materials (e.g., highly reflective metals, mirrors, etc.) are not supported. The laser height probe may generate noise or anomalies when scanning such materials. If processing of these materials is required, carefully verify the scanning results. Do not proceed with processing if the scanning results are abnormal, to avoid material damage.\u003c\/p\u003e\n\u003ch3\u003eProcessing \u0026amp; Engraving Range Limitations for Laser Rotary Attachment\u003c\/h3\u003e\n\u003cp\u003eMinimum \u0026amp; Maximum diameter of workpieces: 57 mm \u0026amp; 105 mm\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image-59.png\" alt=\"image-59.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eMaximum processing length: 220 mm (H2D)\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image-60.png\" alt=\"image-60.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eMaximum adjustment angle: 45°\u003c\/p\u003e\n\u003cp\u003eThe rotation axis angle can be viewed on the printer's screen.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"image-55.png\" src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image-55.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eLaser Rotary Attachment Processing Mode\u003c\/h3\u003e\n\u003cp\u003eLaser rotary attachment processing includes two modes, and you can select the corresponding one according to the shape characteristics of the workpiece.\u003c\/p\u003e\n\u003ch3\u003eRevolve Shape Processing\u003c\/h3\u003e\n\u003cp\u003eSuitable for rotary objects with concave-convex surfaces, such as frustoconical cups and vases. This mode strongly relies on measurement.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image_tips_revolve_shape.png\" alt=\"image_tips_revolve_shape.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eCylinder Processing\u003c\/h3\u003e\n\u003cp\u003eSuitable for cylindrical objects such as cans. This mode allows for processing by manually entering the radius, height, and length, and does not require mandatory reliance on measurement.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"image_tips_cylinder.png\" src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image_tips_cylinder.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003ePre-processing\u003c\/h3\u003e\n\u003cp\u003eTo achieve higher processing accuracy, please tap \"Settings \u0026gt; Toolbox\" on the screen before processing to perform birdseye camera setup, laser module setup, or laser module mounting calibration.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"image-56.png\" src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image-56.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eUnboxing\u003c\/h3\u003e\n\u003cp\u003eTake out the foam padding of the rotary attachment.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"image-58.png\" src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image-58.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eInsert the three claws into the rotary chuck one by one and fasten the claw buckles securely.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/20260316154945_9248_5.png?v=1773647447\"\u003e\u003c\/p\u003e\n\u003cp\u003ePeel off the adhesive tape on the support module and take out the foam padding.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/20260316155332_9251_5.png?v=1773647635\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWorkpiece Installation\u003c\/h3\u003e\n\u003cp\u003eRemove the cup cover.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image-70.png\" alt=\"image-70.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eClamp the wider end of the workpiece with the claws, rotate the chuck tightening ring to a size matching the workpiece, and secure the workpiece in place.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/20260316155539_9254_5.png?v=1773647757\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eNote: If necessary, adjust the claw buckles to fit the dimensions of the workpiece.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/%E8%B0%83%E8%8A%82%E5%8D%A1%E6%89%A3-1.webp\" alt=\"调节卡扣-1.webp\"\u003e\u003c\/p\u003e\n\u003cp\u003eRotate the locking knob on the support module to lower the mounting block.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image-66.png\" alt=\"image-66.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eRotate the height adjustment knob to lower the support roller.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image-63.png\" alt=\"image-63.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eDetach the sphere holder on the right side and install it in the upper position of the support module.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/20260316155814_9259_5.png?v=1773647914\"\u003e\u003c\/p\u003e\n\u003cp\u003eInsert the support module into the rotary attachment.\u003c\/p\u003e\n\u003ch3\u003eNotes:\u003c\/h3\u003e\n\u003cp\u003e1.The support module is not a mandatory installation component and should be used based on the specifications of the workpiece. For long or heavy workpieces, it is recommended to install the support module to prevent unstable clamping by the claws caused by excessive gravity on one end of the workpiece.\u003c\/p\u003e\n\u003ch3\u003e2.Two points should be noted when installing the support module:\u003c\/h3\u003e\n\u003cp\u003eEnsure it does not interfere with the workpiece.\u003c\/p\u003e\n\u003cp\u003eEnsure the correct installation orientation. Reversed installation will block the positioning mark of the rotary attachment, which may trigger subsequent error alarms.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image-64.png\" alt=\"image-64.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eRotate the locking knob to secure the support module.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image-61.png\" alt=\"image-61.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eRotate the workpiece to check for eccentricity. If eccentric contact occurs, re-adjust the height adjustment knob.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/%E5%81%8F%E5%BF%83-1.webp\" alt=\"偏心-1.webp\"\u003e\u003c\/p\u003e\n\u003cp\u003eLoosen the angle lock knob of the rotary attachment and place the spirit level.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/0_f4287a19-4762-43cb-a1b2-1f6436e1b464.png?v=1773649136\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eFine-tune the height adjustment knob on the support module until the bubble in the spirit level is centered.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/20260316162210_9267_5.png?v=1773649351\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eTighten the angle lock knob securely.\u003c\/p\u003e\n\u003cp\u003e\u003cimg\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image-80.png\" alt=\"image-80.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003ePlacement of the Rotary Attachment\u003c\/h3\u003e\n\u003cp\u003eNote: Pay attention to the wiring and installation position when installing the rotary attachment; the attachment shall be mounted at the designated position on the laser platform.\u003c\/p\u003e\n\u003cp\u003ePlug the L-shaped connector of the cable into the rotary attachment.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/360_20260316163122.png?v=1773649908\"\u003ePlace the rotary attachment into the printer, align it with the locating pin of the laser platform (at the slot position of the rotary attachment), and ensure that the laser platform does not shift.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"image-79.png\" src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image-79.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eEnsure the attachment is clipped onto the locating pin and remains level.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/360_20260316163345.png?v=1773650116\"\u003e\u003c\/p\u003e\n\u003cp\u003eNote:\u003cbr\u003eThe rotary attachment must be clipped onto the locating pin and placed parallel to the front laser safety window. The following is an example of incorrect placement.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image-76.png\" alt=\"image-76.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eIf the placement is incorrect or the positioning mark is blocked, the birdseye camera will fail to scan the positioning mark within the specified range, and the system will display a relevant error message.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/9_e3f598e9-70cb-415e-aa6d-e8ad18f14b42.png?v=1773650431\"\u003e\u003c\/p\u003e\n\u003cp\u003ePlug the other end of the rotary attachment into the interface shown in the diagram. Then, close the front laser safety window and the top laser protection plate.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"image-75.png\" src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image-75.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eNote: Opening the front laser safety window and the top laser protection plate will cause image capture failure.\u003c\/p\u003e\n\u003ch3\u003eBambu Suite Operations\u003c\/h3\u003e\n\u003ch3\u003eRevolve Shape Processing\u003c\/h3\u003e\n\u003cp\u003eOpen a project or create a new one in Bambu Suite, and adjust the pattern size as needed\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/create_new_project.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eClick the \"Prepare\" button in the lower right corner to enter the layout page.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/1_dd74310e-c5af-4fd4-a9f6-9c186df41939.png?v=1773651430\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/2_c2a1d50e-88ea-4e00-966a-c6deb0219123.png?v=1773651434\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eSelect \"Revolve Shape Processing\" in the \"Processing Mode\" menu.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"revolve_shape_processing.png\" src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/revolve_shape_processing.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"select_material.png\" src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/select_material.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"capture_image.png\" src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/capture_image.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eNotes for the Image Capturing Process\u003c\/h3\u003e\n\u003cp\u003e1.During image capturing, the front laser safety window must remain closed.\u003c\/p\u003e\n\u003cp\u003e2.Before capturing, the system will first check if the rotary attachment is properly positioned. If you confirm the position is correct, you can skip the pop-up directly.\u003c\/p\u003e\n\u003cp\u003e3.The image displayed after capturing is a flattened 2D rendering of the object's surface, where the central axis corresponds to the top position of the workpiece.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/20260127-150114.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"image_-_2026-01-27t145517.996.png\" src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image_-_2026-01-27t145517.996.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e4.During image capturing, it is necessary to ensure the rotary attachment is placed horizontally and parallel to the front laser safety window, and that the rotation axis angle of the rotary attachment is close to 0° to guarantee measurement accuracy. If the above conditions are not met, it will lead to deviations in measurement results, which will further affect the final quality. If the rotation axis angle is not adjusted to horizontal and only the upper surface of the workpiece is kept horizontal, measurement errors will occur for frustum-shaped workpieces, and the device will mistakenly identify them as cylinders with consistent front and rear diameters.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/img_v3_02u4_9d5dc138-7225-4d1e-9f17-1e222748320g.jpg\" alt=\"通过角度固定旋钮调节旋转轴角度\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe rotation angle value can be viewed on the screen:\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/360_20260316170555.png?v=1773652002\"\u003e\u003c\/p\u003e\n\u003cp\u003e5.Currently, when performing image capturing on objects with high reflectivity or short length, unstable measurement may occur. This issue will be optimized in subsequent software versions.\u003c\/p\u003e\n\u003cp\u003eAfter the image capture is complete, Bambu Suite will display the unfolded view and the 3D simulation view (in the lower right corner).\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"capture_done.png\" src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/capture_done.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eNote: The blank areas above and below the material represent the surface areas of the material when unfolded.\u003c\/p\u003e\n\u003cp\u003eThe pattern can be rotated or scaled, and dragged to the target processing area. Drag the simulation view in the lower right corner to preview the expected effect after processing.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"suite_en.webp\" src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/suite_en.webp\"\u003e\u003c\/p\u003e\n\u003cp\u003eClick the \"Make\" button in the lower right corner. Confirm that the laser module, laser platform, and rotary attachment are all properly installed, then click \"Send\" to start the processing.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/make_button.png\" alt=\"make_button.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/send_button.png\" alt=\"send_button.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eCylinder Processing\u003c\/h3\u003e\n\u003cp\u003eThe cylinder processing mode is similar to the revolve shape processing mode, with the difference that the diameter, height, and length of the right side of the workpiece can be set via manual input. This mode is only applicable to cylindrical materials with regular surfaces and consistent diameters.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"image-91.png\" src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image-91.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eIf you need to process a frustum cup in Cylinder Processing mode, you can quickly start the processing by adjusting the rotation axis angle. Please refer to the steps below.\u003c\/h3\u003e\n\u003cp\u003eLoosen the angle lock knob.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/image-89.png\" alt=\"image-89.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eAdjust the rotation axis angle to ensure the upward-facing side of the frustum is parallel to the laser module, thus guaranteeing the uniformity and precision of the processed surface.\u003c\/p\u003e\n\u003cp\u003eIt is recommended to use a spirit level for auxiliary parallelism checks.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/360_20260316171218.png?v=1773652460\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eTap \"Control \u0026gt; Rotary Attachment\" on the screen to view the rotation axis angle. Green indicates the optimal angle for processing; excessively large angles may be blocked during the image-capturing process. Then gently rotate the angle lock knob to secure it.\u003c\/p\u003e\n\u003cp\u003eNote: The device will not trigger the interception mechanism in offline processing mode; interception is only performed during the image capture phase.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/360_20260316171558.png?v=1773652575\"\u003e\u003c\/p\u003e\n\u003cp\u003eWhen the rotary attachment is level, the angle displayed on the screen is typically green. If the angle is shown in red or orange (indicating an excessive or insufficient angle), see the image below:\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"screenshot-20260202-164532.png\" src=\"https:\/\/wiki.bambulab.com\/h2\/manual\/rotary-attachment-guide\/screenshot-20260202-164532.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eUse an H1.5 Allen key to turn the rotary attachment screw, and check the screen simultaneously until the angle indicator turns green.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/360_20260316171720.png?v=1773652656\"\u003e\u003c\/p\u003e\n\u003cp\u003eNote: Do not loosen or tighten this screw unless necessary, as this may compromise processing accuracy.\u003c\/p\u003e\n\u003ch3\u003ePost-processing\u003c\/h3\u003e\n\u003cp\u003eAfter processing is completed, rotate the chuck adjustment ring and remove the workpiece.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/360_20260316171836.png?v=1773652732\"\u003e\u003c\/p\u003e\n\u003ch3\u003eLaser Rotary Attachment Processing Precautions\u003c\/h3\u003e\n\u003cp\u003e1.If the cup is equipped with a detachable handle, remove the handle first to ensure optimal processing results.\u003c\/p\u003e\n\u003cp\u003e2.For better processing quality, it is recommended not to place the jaws directly above the workpiece.\u003c\/p\u003e\n\u003cp\u003e3.Processing of small objects such as spheres and rings is not supported.\u003c\/p\u003e\n\u003ch3\u003eLaser Rotary Attachment Processing Quality Issues\u003c\/h3\u003e\n\u003ch3\u003eLine Shaking During Processing\u003c\/h3\u003e\n\u003cp\u003e1.Check if the laser platform is flat and free of dirt.\u003c\/p\u003e\n\u003cp\u003e2.Check if there are any foreign objects adhered to the base plate of the rotary attachment.\u003c\/p\u003e\n\u003cp\u003e3.Check if all the foot pads on the base plate of the rotary attachment are intact.\u003c\/p\u003e\n\u003cp\u003e4.Check if the rotary attachment is placed correctly; confirm that there are no grooves at the placement position to prevent any foot pad from being suspended.\u003c\/p\u003e\n\u003cp\u003e5.Check if the workpiece is clamped eccentrically.\u003c\/p\u003e\n\u003ch3\u003eGhosting or Misalignment in Laser Fill\u003c\/h3\u003e\n\u003cp\u003e1.Check whether the angle lock knob is loosened when the support module is in use.\u003c\/p\u003e\n\u003cp\u003e2.If the support module is used, check whether the angle lock knob is loosened (this knob needs to be loosened when the support module is in use to ensure the workpiece is not jammed by the cup holder).\u003c\/p\u003e\n\u003cp\u003e3.If the workpiece has a non-detachable handle, check whether the handle collides with the laser module during processing.\u003c\/p\u003e\n\u003cp\u003e4.When the workpiece is fixed with claws, check whether the claws hold the workpiece tightly and whether the workpiece shakes or even shifts when rotating.\u003c\/p\u003e\n\u003cp\u003e5.Confirm if there is any nearby equipment that generates obvious vibrations.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Rotary Attachment \/ Accessory Kit","offer_id":52014143209785,"sku":null,"price":19.0,"currency_code":"USD","in_stock":true},{"title":"Rotary Attachment \/ Bus Cable 4-pin","offer_id":52014143144249,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true},{"title":"Rotary Attachment \/ Support Module","offer_id":52014143177017,"sku":null,"price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/Bus_Cable_4-pin_Rotary_Attachment_Support_Module_Accessory_Kit.png?v=1773718128","url":"https:\/\/p3d.mx\/es\/products\/for-bambu-bus-cable-4-pin-rotary-attachment-support-module-accessory-kit","provider":"P3D","version":"1.0","type":"link"}