{"product_id":"birds-eye-camera-for-bambu-lab","title":"Birds Eye Camera for Bambu Lab","description":"\u003cp\u003eThe Birds Eye Camera is installed on the inner side of the top frame.\u003c\/p\u003e\n\u003ch3\u003e In the Box\u003c\/h3\u003e\n\u003cp\u003e- Birds Eye Camera*1\u003c\/p\u003e\n\u003ch3\u003e Compatibility\u003c\/h3\u003e\n\u003cp\u003eH2 Series (Laser \u0026amp; Cutting)\u003c\/p\u003e\n\u003ch3\u003eReplace H2 Series BirdsEye Camera\/BirdsEye Camera Cable\u003c\/h3\u003e\n\u003cp\u003eLearn how to replace the H2 series birdseye camera.\u003c\/p\u003e\n\u003cp\u003eNote: This page uses the H2D machine as an example. The replacement steps are exactly the same for the H2S and H2C.\u003c\/p\u003e\n\u003ch3\u003eBirds Eye Camera\u003c\/h3\u003e\n\u003cp\u003eThe BirdsEye Camera is mounted on the inner side of the printer's upper frame. The birdseye camera is only pre-installed in the H2DL, and is not pre-installed in the H2D.\u003c\/p\u003e\n\u003ch3\u003eThe spare parts of birdseye camera include:\u003c\/h3\u003e\n\u003cp\u003eBirdsEye Camera × 1\u003c\/p\u003e\n\u003cp\u003eBirdsEye Camera Cable × 1\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"image-15.png\" src=\"https:\/\/wiki.bambulab.com\/h2\/maintenance\/replace-birds-eye-camera\/image-15.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhen to use\u003c\/h3\u003e\n\u003cp\u003eThe birdseye camera is broken.\u003c\/p\u003e\n\u003ch3\u003eTools and Materials Needed\u003c\/h3\u003e\n\u003cp\u003e1.New birdseye camera\u003c\/p\u003e\n\u003cp\u003e2.H1.5 Allen key or tweezers\u003c\/p\u003e\n\u003cp\u003e3.H2.0 Allen key - only required when replacing the birdseye camera cable;\u003c\/p\u003e\n\u003ch3\u003eSafety Warning\u003cbr\u003eIMPORTANT!\u003c\/h3\u003e\n\u003cp\u003eIt's crucial to power off the printer before conducting any maintenance work, including work on the printer's electronics and tool head wires. Performing tasks with the printer on can result in a short circuit, leading to electronic damage and safety hazards.\u003c\/p\u003e\n\u003cp\u003eDuring maintenance or troubleshooting, you may need to disassemble parts, including the hotend. This exposes wires and electrical components that could short circuit if they contact each other, other metal, or electronic components while the printer is still on. This can result in damage to the printer's electronics and additional issues.\u003c\/p\u003e\n\u003cp\u003eTherefore, it's crucial to turn off the printer and disconnect it from the power source before conducting any maintenance. This prevents short circuits or damage to the printer's electronics, ensuring safe and effective maintenance. \u003c\/p\u003e\n\u003ch3\u003eReplace the BirdsEye Camera\u003c\/h3\u003e\n\u003cp\u003eRemove the BirdsEye Camera\u003c\/p\u003e\n\u003ch3\u003eStep 1: Remove the BirdsEye Camera\u003c\/h3\u003e\n\u003cp\u003eThe birdseye camera is fixed by clips. You can use an H1.5 Allen key or tweezers to pry out the clip on one side of the bird's-eye camera and remove it.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"俯视摄像头.webp\" src=\"https:\/\/wiki.bambulab.com\/h2\/maintenance\/replace-birds-eye-camera\/%E4%BF%AF%E8%A7%86%E6%91%84%E5%83%8F%E5%A4%B4.webp\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 2: Disconnect the BirdsEye Camera Cable\u003c\/h3\u003e\n\u003cp\u003eUnfasten the black buckle above the birdseye camera cable and then pull out the birdseye camera cable.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-02-13_104102_376.png?v=1770950491\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eInstall the BirdsEye Camera\u003c\/h3\u003e\n\u003ch3\u003eStep 1: Connect the BirdsEye Camera Cable\u003c\/h3\u003e\n\u003cp\u003ePlug the birdseye camera cable on the printer into the interface on the camera and fasten the black buckle.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"screenshot-20250411-144655.png\" src=\"https:\/\/wiki.bambulab.com\/h2\/maintenance\/replace-birds-eye-camera\/screenshot-20250411-144655.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 2: Install the BirdsEye Camera\u003c\/h3\u003e\n\u003cp\u003eUse an Allen key to gently push the LED ribbon cable inwards to prevent it from being damaged when installing the camera.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/maintenance\/replace-birds-eye-camera\/image-new.png\" alt=\"压排线\"\u003e\u003c\/p\u003e\n\u003cp\u003eAlign the buckle of the birdseye camera cover with the groove on the printer, press the birdseye camera cover with a little force, and insert it into the printer.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"image-26.png\" src=\"https:\/\/wiki.bambulab.com\/h2\/maintenance\/replace-birds-eye-camera\/image-26.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eReplace the BirdsEye Camera Cable\u003c\/h3\u003e\n\u003cp\u003eRemove the BirdsEye Camera Cable\u003c\/p\u003e\n\u003ch3\u003eStep 1: Open the AP Board Cover\u003c\/h3\u003e\n\u003cp\u003eUse an H2.0 Allen key to remove one AP board cover fixing screw (BT2.6×8), and then open the AP board cover from the side close to the front door.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-02-13_104500_928.png?v=1770950719\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 2: Remove the BirdsEye Camera\u003c\/h3\u003e\n\u003cp\u003eThe birdseye camera is secured by clips. Press the clips on both sides of the birdseye camera cover while gently flipping it downward to release.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-02-13_104602_905.png?v=1770950778\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 3: Remove the BirdsEye Camera Cable\u003c\/h3\u003e\n\u003cp\u003eDisconnect the birdseye camera cable from the AP board, then peel it off the upper frame and disconnect it from the birdseye camera.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-02-13_104854_191.png?v=1770950948\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eInstall the BirdsEye Camera Cable\u003c\/h3\u003e\n\u003ch3\u003eStep 1: Connect the BirdsEye Camera and the camera cable\u003c\/h3\u003e\n\u003cp\u003e1.Connect the end of the cable without the \"AP\" label to the BirdsEye camera.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"screenshot-20250411-144655.png\" src=\"https:\/\/wiki.bambulab.com\/h2\/maintenance\/replace-birds-eye-camera\/screenshot-20250411-144655.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e2.Use an Allen key to gently push the LED ribbon cable inwards to prevent it from being damaged when installing the camera.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"压排线\" src=\"https:\/\/wiki.bambulab.com\/h2\/maintenance\/replace-birds-eye-camera\/image-new.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e3.Install the BirdsEye camera. Align the two side buckles on the camera housing with the two small grooves on the printer.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-02-13_105136_274.png?v=1770951109\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4. Gently press the camera housing upward until you hear a \"click\" sound, indicating it is securely installed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/maintenance\/replace-birds-eye-camera\/image-new_(3).png\" alt=\"image-new_(3).png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e5.Wipe the camera lens with a non-woven cloth to remove any dust.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/maintenance\/replace-birds-eye-camera\/image-new_(14).png\" alt=\"image-new_(14).png\"\u003e\u003c\/span\u003e\u003cspan\u003eAttach the BirdsEye Camera Cable\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1.Remove one fixed screw from the AP board cover.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"image-new_(11).png\" src=\"https:\/\/wiki.bambulab.com\/h2\/maintenance\/replace-birds-eye-camera\/image-new_(11).png\"\u003e2. Open the AP board cover.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"image-new_(9).png\" src=\"https:\/\/wiki.bambulab.com\/h2\/maintenance\/replace-birds-eye-camera\/image-new_(9).png\"\u003e3. When routing the cable, avoid the chamber temperature sensor and the flame sensor (marked in red boxes below).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-02-13_105526_165.png?v=1770951339\"\u003e\u003c\/span\u003e\u003cspan\u003eNote: Apply continuous and firm pressure for about 30 seconds during attachment to ensure proper adhesion.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"image-new_(5).png\" src=\"https:\/\/wiki.bambulab.com\/h2\/maintenance\/replace-birds-eye-camera\/image-new_(5).png\"\u003e\u003c\/span\u003e\u003cspan\u003e4.Peel off the sticker backing from the cable buckle.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/maintenance\/replace-birds-eye-camera\/image-new_(6).png\" alt=\"image-new_(6).png\"\u003e\u003c\/span\u003e\u003cspan\u003e5.Align the buckle with the screw hole on the upper cover and stick it in place.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-02-13_110125_772.png?v=1770951699\"\u003e\u003c\/span\u003e\u003cspan\u003eNote: Apply continuous and firm pressure for about 15 seconds during attachment to ensure secure adhesion.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e6.Install the second buckle in the middle section between the BirdsEye camera and the first buckle, then press it firmly into place.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-02-13_110305_779.png?v=1770951804\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e7. Tighten the screw to secure the buckle.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-02-13_110344_419.png?v=1770951841\"\u003e\u003c\/span\u003e\u003cspan\u003eStep 3: Connect the camera cable to the AP Board\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eOpen the black latch.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"image-new_(15).png\" src=\"https:\/\/wiki.bambulab.com\/h2\/maintenance\/replace-birds-eye-camera\/image-new_(15).png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2.Route the camera cable behind the other wires and connect it to the AP board.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"image-new_(16).png\" src=\"https:\/\/wiki.bambulab.com\/h2\/maintenance\/replace-birds-eye-camera\/image-new_(16).png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e3. Press the latch firmly to lock it.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"image-new_(17).png\" src=\"https:\/\/wiki.bambulab.com\/h2\/maintenance\/replace-birds-eye-camera\/image-new_(17).png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e4.Close the AP board cover.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"image-new_(18).png\" src=\"https:\/\/wiki.bambulab.com\/h2\/maintenance\/replace-birds-eye-camera\/image-new_(18).png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e5.Tighten the fixed screw.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/ScreenShot_2026-02-13_112433_282.png?v=1770953113\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eVerify the Functionality\u003c\/h3\u003e\n\u003cp\u003eOnce the laser module is installed, you will be prompted to initialize the birdseye camera. Follow the on-screen instructions to complete the setup.\u003c\/p\u003e\n\u003cp\u003e1.Enter the HMS page and click the \"Begin Setup\" button.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/maintenance\/replace-birds-eye-camera\/%E4%BF%AF%E8%A7%86%E6%91%84%E5%83%8F%E5%A4%B4_%E5%88%9D%E5%A7%8B%E5%8C%96_en.jpg\" alt=\"俯视摄像头_初始化_en.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e2.Alternatively, access it from the Toolbox page and select \"BirdsEye Camera Begin Setup\".\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/troubleshooting\/hmscode\/0500_0400_0002_0031\/toolbox_en.jpg\" alt=\"toolbox_en.jpg\"\u003e\u003cimg src=\"https:\/\/wiki.bambulab.com\/h2\/maintenance\/replace-birds-eye-camera\/birdseyecamera_1.png\" alt=\"birdseyecamera_1.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003col start=\"5\"\u003e\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"H2 Series (Laser \u0026amp; Cutting)","offer_id":51935710904633,"sku":"PR00681","price":91.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/Birds_Eye_Camera.png?v=1772431910","url":"https:\/\/p3d.mx\/es\/products\/birds-eye-camera-for-bambu-lab","provider":"P3D","version":"1.0","type":"link"}