{"product_id":"bambu-x2d-toolhead-middle-housing-front-cover-rear-cover","title":"Bambu X2D Toolhead Middle Housing \/ Front Cover \/ Rear Cover","description":"\u003ch3 style=\"text-align: center;\"\u003eToolhead Middle Housing \u003c\/h3\u003e\n\u003cp\u003eA plastic enclosure designed to seal the middle part of the toolhead.\u003c\/p\u003e\n\u003ch3\u003e In the Box\u003c\/h3\u003e\n\u003cp\u003e- Toolhead Middle Frame *1\u003c\/p\u003e\n\u003cp\u003e-BT2x5 Screw *4\u003c\/p\u003e\n\u003ch3\u003e Compatibility\u003c\/h3\u003e\n\u003cp\u003eX2D\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/for_Bambu_-Toolhead_Middle_Housing.jpg?v=1776233831\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eToolhead Front Cover Assembly\u003c\/h3\u003e\n\u003cp\u003eIncludes the front cover housing and part-cooling fan, secured to the Toolhead Middle Housing via magnets.\u003c\/p\u003e\n\u003ch3\u003e In the Box\u003c\/h3\u003e\n\u003cp\u003e- Toolhead Front Cover Assembly *1\u003c\/p\u003e\n\u003ch3\u003e Compatibility\u003c\/h3\u003e\n\u003cp\u003eX2D\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/Toolhead_Front_Cover_Assembly_for_Bambu.jpg?v=1776235289\" alt=\"Toolhead Middle Housing Toolhead Front Cover AssemblyToolhead Rear Cover - X2D\"\u003e\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003eToolhead Rear Cover\u003c\/h3\u003e\n\u003cp\u003eA plastic enclosure designed to seal the rear part of the toolhead.\u003c\/p\u003e\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cp\u003e- Toolhead Rear Cover *1\u003c\/p\u003e\n\u003cp\u003e- Spring*1\u003c\/p\u003e\n\u003cp\u003e-BT2x5 Screw *4\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eX2D\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/Toolhead_Rear_Cover_-_X2D_9cf7ff57-26c0-4323-a956-9dd9c6bda398.jpg?v=1776244538\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eToolhead Housing Replacement Guide for the X2D\u003c\/h3\u003e\n\u003cp\u003eThis page introduces how to replace the X2D toolhead housing.\u003c\/p\u003e\n\u003ch3\u003eToolhead Housing\u003c\/h3\u003e\n\u003cp\u003e🔎 Find the X2D Toolhead Housing in the Bambu Lab store.\u003c\/p\u003e\n\u003cp\u003eThe toolhead housing consists of 3 components:\u003c\/p\u003e\n\u003cp\u003e1.Toolhead front cover assembly: composed of the toolhead front cover and Part Cooling Fan assembly, magnetically attached to the toolhead middle housing;\u003c\/p\u003e\n\u003cp\u003e2.Toolhead rear cover: a plastic cover sealing the rear of the toolhead;\u003c\/p\u003e\n\u003cp\u003e3.Toolhead middle housing assembly: a plastic cover at the center of the toolhead, with magnets on the upper part to secure the front cover assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/MIX_256aec1d-7708-467b-80b0-f42d31ae95a0.jpg?v=1776235035\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eApplicable printer model\u003c\/h3\u003e\n\u003cp\u003eBambu Lab X2D\u003c\/p\u003e\n\u003ch3\u003eWhen to Replace\u003c\/h3\u003e\n\u003cp\u003eToolhead front cover assembly\u003c\/p\u003e\n\u003cp\u003ePhysical damage occurred, including magnet detachment\u003cbr\u003ePart Cooling Fan failure\u003c\/p\u003e\n\u003ch3\u003eToolhead rear cover\u003c\/h3\u003e\n\u003cp\u003ePhysical damage occurred\u003c\/p\u003e\n\u003ch3\u003eToolhead middle housing assembly\u003c\/h3\u003e\n\u003cp\u003ePhysical damage occurred, including magnet detachment\u003c\/p\u003e\n\u003ch3\u003eRequired tools and materials\u003c\/h3\u003e\n\u003cp\u003eH1.5 allen key\u003c\/p\u003e\n\u003cp\u003eWrench\u003c\/p\u003e\n\u003cp\u003eToolhead front cover assembly \/ toolhead rear cover \/ toolhead middle housing assembly\u003c\/p\u003e\n\u003ch3\u003eSafety Warning\u003c\/h3\u003e\n\u003ch3\u003e⚠️ IMPORTANT!\u003c\/h3\u003e\n\u003cp\u003eIt's crucial to power off the printer before conducting any maintenance work, including work on the printer's electronics and tool head wires. Performing tasks with the printer on can result in a short circuit, leading to electronic damage and safety hazards.\u003c\/p\u003e\n\u003cp\u003eDuring maintenance or troubleshooting, you may need to disassemble parts, including the hotend. This exposes wires and electrical components that could short circuit if they contact each other, other metal, or electronic components while the printer is still on. This can result in damage to the printer's electronics and additional issues.\u003c\/p\u003e\n\u003cp\u003eTherefore, it's crucial to turn off the printer and disconnect it from the power source before conducting any maintenance. This prevents short circuits or damage to the printer's electronics, ensuring safe and effective maintenance. \u003c\/p\u003e\n\u003ch3\u003eRemove the old toolhead housing\u003c\/h3\u003e\n\u003ch3\u003eStep 1. Remove the toolhead front cover\u003c\/h3\u003e\n\u003cp\u003eOpen the toolhead front cover, press the connector locking tab on the side to unplug the connector, and remove the toolhead front cover.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"002_remove_front_cover_cable.png\" src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/x2d\/maintenance\/replace_toolhead_cover\/002_remove_front_cover_cable.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 2. Remove the toolhead rear coverUse an H1.5 allen key to remove the 4 screws on the side of the toolhead rear cover.\u003c\/h3\u003e\n\u003cp\u003eUse an H1.5 allen key to remove the 4 screws on the side of the toolhead rear cover.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/64.jpg?v=1776236474\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eGently wiggle the toolhead rear cover to loosen the locking tabs (avoid excessive force to prevent tab breakage), then remove the toolhead rear cover.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"005_remove_rear_cover.png\" src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/x2d\/maintenance\/replace_toolhead_cover\/005_remove_rear_cover.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 3. Remove the toolhead middle housing\u003c\/h3\u003e\n\u003cp\u003eUse an H1.5 allen key to remove the 4 screws on the side.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/65.jpg?v=1776237260\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eℹ️ Note: Removing the filament tubes below is not mandatory, but makes the middle housing easier to remove.If the maintenance does not involve the extruder or the extruder filament sensor board, the filament tubes can be left in place.\u003c\/p\u003e\n\u003cp\u003ePress the pneumatic connector on the left extruder filament sensor board and unplug the filament tube.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/x2d\/maintenance\/replace_toolhead_cover\/008_release_left_tube.png\" alt=\"008_release_left_tube.png\"\u003e\u003c\/p\u003e\n\u003cp\u003ePush the lever of the flow blocker assembly to the right to expose the pneumatic connector on the right extruder filament sensor board, then use a wrench to loosen the pneumatic connector counterclockwise and remove the filament tube.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/x2d\/maintenance\/replace_toolhead_cover\/009_release_right_tube.png\" alt=\"009_release_right_tube.png\"\u003e\u003c\/p\u003e\n\u003cp\u003ePry open the bottom of the middle housing by hand, loosen the left side first, then detach the toolhead middle housing from the Cable Chain bracket and remove it.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/x2d\/maintenance\/replace_toolhead_cover\/010_remove_mid_cover.png\" alt=\"010_remove_mid_cover.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eInstall the new toolhead housing\u003c\/h3\u003e\n\u003ch3\u003eStep 1. Install the toolhead middle housing\u003c\/h3\u003e\n\u003cp\u003eAlign the notch on the toolhead middle housing with the Cable Chain bracket and press in, avoiding interference with the toolhead camera on the right side.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"011_install_mid_cover.png\" src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/x2d\/maintenance\/replace_toolhead_cover\/011_install_mid_cover.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eInstall the middle housing onto the toolhead.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/x2d\/maintenance\/replace_toolhead_cover\/012_install_mid_cover.png\" alt=\"012_install_mid_cover.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eInstall the filament tube of the auxiliary extruder onto the pneumatic connector, then use the printed wrench to tighten the pneumatic connector clockwise to secure the right filament tube.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/x2d\/maintenance\/replace_toolhead_cover\/009_release_right_tube.png\" alt=\"009_release_right_tube.png\"\u003e\u003c\/p\u003e\n\u003cp\u003ePush the lever of the flow blocker assembly to the left to lower the pneumatic connector on the right extruder filament sensor board.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/20260415155108_10163_5.png?v=1776241369\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eInstall the left filament tube onto the left pneumatic connector and gently pull to check whether it is properly seated.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/x2d\/maintenance\/replace_toolhead_cover\/014_install_left_tube.png\" alt=\"014_install_left_tube.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eTighten the 4 screws on the toolhead middle housing.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/65.jpg?v=1776237260\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 2. Install the toolhead rear cover\u003c\/h3\u003e\n\u003cp\u003eInstall the toolhead rear cover onto the toolhead, ensuring all locking tabs on the cover are properly engaged.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"015_install_rear_cover.png\" src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/x2d\/maintenance\/replace_toolhead_cover\/015_install_rear_cover.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eThen secure the 4 screws on the sides.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/64.jpg?v=1776236474\"\u003e\u003c\/p\u003e\n\u003ch3\u003eStep 3. Install the toolhead front cover assembly\u003c\/h3\u003e\n\u003cp\u003eConnect the toolhead front cover cable to the connector on the extruder connection board.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"016_install_front_cover.png\" src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/x2d\/maintenance\/replace_toolhead_cover\/016_install_front_cover.png\"\u003e\u003c\/p\u003e\n\u003cp\u003eOrganize the cables neatly and close the toolhead front cover assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/public-cdn.bblmw.com\/wiki\/new\/x2d\/maintenance\/replace_toolhead_cover\/017_front_cover.png\" alt=\"017_front_cover.png\"\u003e\u003c\/p\u003e\n\u003ch3\u003eVerifying Success\u003c\/h3\u003e\n\u003cp\u003e✅ Check the gaps between housings for any obvious misalignment or lifting.\u003c\/p\u003e\n\u003cp\u003e✅ The Part Cooling Fan operates normally, turning on and off as expected.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"X2D \/ Toolhead Middle Housing","offer_id":52145709089081,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true},{"title":"X2D \/ Toolhead Front Cover Assembly","offer_id":52145709121849,"sku":null,"price":35.0,"currency_code":"USD","in_stock":true},{"title":"X2D \/ Toolhead Rear Cover","offer_id":52145709154617,"sku":null,"price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/4531\/2569\/files\/Bambu_X2D_Toolhead_Middle_Housing_Front_Cover_Rear_Cover.jpg?v=1779258820","url":"https:\/\/p3d.mx\/es\/products\/bambu-x2d-toolhead-middle-housing-front-cover-rear-cover","provider":"P3D","version":"1.0","type":"link"}